我在P550的AIX6.1无法安装Sybase15.7，求解
我在P550的AIX6.1安装Sybase15.7时出现如下错误提示，在AIX5.3版安装sybase 12.5也都反复尝试过，都无法安装，谢谢各位大侠！
Port number '5000' is being reserved or currently in use by a running server.
Building Adaptive Server 'AIXMK':
Writing entry into directory services...
Directory services entry complete.
Building master device...
Task failed
Server 'AIXMK' was not created.
Could not load program dataserver:
Symbol resolution failed for dataserver because:
Symbol CreateIoCompletionPort (number 554) is not exported from dependent
module /unix.
Symbol GetMultipleCompletionStatus (number 555) is not exported from dependent
module /unix.
Symbol PostQueuedCompletionStatus (number 556) is not exported from dependent
module /unix.
Symbol ReadFile (number 557) is not exported from dependent
module /unix.
Symbol WriteFile (number 558) is not exported from dependent
module /unix.
Examine .loader section symbols with the 'dump -Tv' command.
16同行回答
AIX的异步IO没打开smitty chgaio=>将STATE to be configured at system restart的值修改为available或ch ...genius 发表于 2012-12-26 01:35
6.1也要修改了的 我遇到过。 同样的问题。。改了就可以了。 你试一下...AIX的异步IO没打开
smitty chgaio=>将STATE to be configured at system restart的值修改为available
或
ch ...
genius 发表于 2012-12-26 01:35
6.1也要修改了的 我遇到过。 同样的问题。。改了就可以了。 你试一下收起
smitty chgaio=>将STATE to be configured at system restart的值修改为available
或
chdev -l aio0 -P -a autoconfig='available'
修改参数后，重启机器。
参考博文：
Sybase ASE 15.7 Installation Guide For AIX
http://candon123.blog.51cto.com/704299/964209
CreateIoCompletionPort() problems
http://www.ibm.com/developerwork ... ?messageID=14591091收起
谢谢！我试试
现在我又安装一遍，将端口由5000变成没有使用的50000，上面端口问题没有了，但是还是出现下面的提示：
Building Adaptive Server 'AIXMK':
Writing entry into directory services...
Directory services entry complete.
Building master device...
Task failed
Server 'AIXMK' was not created.
Could not load program dataserver:
Symbol resolution failed for dataserver because:
Symbol CreateIoCompletionPort (number 554) is not exported from dependent
module /unix.
Symbol GetMultipleCompletionStatus (number 555) is not exported from dependent
module /unix.
Symbol PostQueuedCompletionStatus (number 556) is not exported from dependent
module /unix.
Symbol ReadFile (number 557) is not exported from dependent
module /unix.
Symbol WriteFile (number 558) is not exported from dependent
module /unix.
Examine .loader section symbols with the 'dump -Tv' command.收起
% lsdev -Cc iocp
如果您安装了 IOCP 并使其可用，系统会显示“Available”并提供有关安装的其它信息，
在OS上设置 IOCP 可用的方法：
1. 以 root 身份登录到 IBM 计算机上，并发出：
# smitty iocp
2. 选择“更改/显示 I/O 完成端口的特性”(Change/Show Characteristics of I/O
Completion Ports)。
3. 将 IOCP 的状态从“已定义”更改为“可用”。
4. 重新启动计算机。
5. 再次运行 lsdev 以确认 IOCP 的状态已更新。收起