环境是AIX6.1+HACMP6+IPSAN挂的H3C存储
实验是做双机热备，由于环境限制，只能使用IP替换的方式，即双机启动后SERVICE IP替换BOOT IP
双机启动后，可以正常访问SERVICE IP
但是查看vg状态一直无法变为active
查看hacmp.out 输出卡在
# tail -f /var/hacmp/log/hacmp.out
+group_jxha:cl_disk_available[12] : for possible ghost disks, which must be later removed
+group_jxha:cl_disk_available[17] : The disk is not available
+group_jxha:cl_disk_available[19] lsdev -Cc disk -l hdisk2 -S A -F status
+group_jxha:cl_disk_available[19] [[ -z Available ]]
+group_jxha:cl_disk_available[50] : Break the reserve - pass the given list of disks having the given parent
+group_jxha:cl_disk_available[115] : Perform a LUN reset on an iSCSI device
+group_jxha:cl_disk_available[117] cl_iscsilunreset iscsi0 hdisk2
cl_iscsilunreset[855]: ioctl SCIOLSTART lun=0X1000000000000 iSCSI name=jx port number=0XCBC address type=IPv4
: Invalid argument
cl_iscsilunreset[430]: openx(hdisk2, O_RDWR, 0, SC_RETAIN_RESERVATION + SC_FORCED_OPEN_LUN): I/O error
^C#
#
# varyonvg -c datavg
0516-949 varyonvg: This volume group not created concurrent capable.
vg都不是随操作系统自动启动的，启动双机软件前vg均不是active状态。
使用cfgmgr命令也卡死
最后实在没办法了，将vg全部全改为增强并发后
双机启动，卷组挂上，状态为concurrent
并不是我想要的结果 ~~又能帮忙分析下原因的吗
收起