互联网服务
有台IBM DS4800启动不起，LED报1.0
专家好：
客户有台IBM DS4800 LED 启动到1.0时就不再启动，可以ping 通192.168.128.101, 和102两个IP,但LED不能启动到85,
也不能认挂的EXP810上的硬盘，
用Storage Manager也不能连上去，
但可以用串口登录，进到Vxworks,下，
看起来好像是就没有正式启动，
后来在串口下升级了firmware,还是老状态（LED 码1.0)，哪位有此经验，如何检查controller的状态？
串口登录信息：
Press within 5 seconds: for Service Interface, for baud rate
Current date: 06/21/10 time: 02:22:32
Enter password to access shell:
LSI Logic RAID Controller
Copyright 2004-2009 LSI Logic Corporation. All Rights Reserved.
Copyright Wind River Systems, Inc., 1998-2002
VxWorks: VxWorks5.5.1 Kernel: WIND version 2.6
Model: 6091 Firmware version: 06.60.22.00
-> help
help Print this list
ioHelp Print I/O utilities help info
dbgHelp Print debugger help info
nfsHelp Print nfs help info
netHelp Print network help info
spyHelp Print task histogrammer help info
timexHelp Print execution timer help info
h [n] Print (or set) shell history
i [task] Summary of tasks' TCBs
ti task Complete info on TCB for task
sp adr,args... Spawn a task, pri=100, opt=0x19, stk=20000
taskSpawn name,pri,opt,stk,adr,args... Spawn a task
td task Delete a task
ts task Suspend a task
tr task Resume a task
d [adr[,nunits[,width]]] Display memory
m adr[,width] Modify memory
mRegs [reg[,task]] Modify a task's registers interactively
pc [task] Return task's program counter
Type to continue, Q to stop:
iam "user"[,"passwd"] Set user name and passwd
whoami Print user name
devs List devices
ld [syms[,noAbort][,"name"]] Load stdin, or file, into memory
(syms = add symbols to table:
-1 = none, 0 = globals, 1 = all)
lkup ["substr"] List symbols in system symbol table
lkAddr address List symbol table entries near address
checkStack [task] List task stack sizes and usage
printErrno value Print the name of a status value
period secs,adr,args... Spawn task to call function periodically
repeat n,adr,args... Spawn task to call function n times (0=forever)
version Print VxWorks version info, and boot line
NOTE: Arguments specifying 'task' can be either task ID or name.
客户有台IBM DS4800 LED 启动到1.0时就不再启动，可以ping 通192.168.128.101, 和102两个IP,但LED不能启动到85,
也不能认挂的EXP810上的硬盘，
用Storage Manager也不能连上去，
但可以用串口登录，进到Vxworks,下，
看起来好像是就没有正式启动，
后来在串口下升级了firmware,还是老状态（LED 码1.0)，哪位有此经验，如何检查controller的状态？
串口登录信息：
Press within 5 seconds:
Current date: 06/21/10 time: 02:22:32
Enter password to access shell:
LSI Logic RAID Controller
Copyright 2004-2009 LSI Logic Corporation. All Rights Reserved.
Copyright Wind River Systems, Inc., 1998-2002
VxWorks: VxWorks5.5.1 Kernel: WIND version 2.6
Model: 6091 Firmware version: 06.60.22.00
-> help
help Print this list
ioHelp Print I/O utilities help info
dbgHelp Print debugger help info
nfsHelp Print nfs help info
netHelp Print network help info
spyHelp Print task histogrammer help info
timexHelp Print execution timer help info
h [n] Print (or set) shell history
i [task] Summary of tasks' TCBs
ti task Complete info on TCB for task
sp adr,args... Spawn a task, pri=100, opt=0x19, stk=20000
taskSpawn name,pri,opt,stk,adr,args... Spawn a task
td task Delete a task
ts task Suspend a task
tr task Resume a task
d [adr[,nunits[,width]]] Display memory
m adr[,width] Modify memory
mRegs [reg[,task]] Modify a task's registers interactively
pc [task] Return task's program counter
Type
iam "user"[,"passwd"] Set user name and passwd
whoami Print user name
devs List devices
ld [syms[,noAbort][,"name"]] Load stdin, or file, into memory
(syms = add symbols to table:
-1 = none, 0 = globals, 1 = all)
lkup ["substr"] List symbols in system symbol table
lkAddr address List symbol table entries near address
checkStack [task] List task stack sizes and usage
printErrno value Print the name of a status value
period secs,adr,args... Spawn task to call function periodically
repeat n,adr,args... Spawn task to call function n times (0=forever)
version Print VxWorks version info, and boot line
NOTE: Arguments specifying 'task' can be either task ID or name.
14同行回答
云里雾里！！！:lol收起
浏览1787
专家好：客户有台IBM DS4800 LED 启动到1.0时就不再启动，可以ping 通192.168.128.101, 和102两个IP,但LE ...unix-db 发表于 2010-6-21 20:23
你说的1.0，应该L0。在DS4XXX的LED上，有L?和88。专家好：
客户有台IBM DS4800 LED 启动到1.0时就不再启动，可以ping 通192.168.128.101, 和102两个IP,但LE ...
unix-db 发表于 2010-6-21 20:23
你说的1.0，应该L0。在DS4XXX的LED上，有L?和88。收起
浏览1792
通过串口收集以下命令输出（两个控制器都要收集，微码在06.xx.xx.xx专用
loadDebug
moduleList
arrayPrintSummary
netCfgShow
inetstatShow
cfgUnitList
vdAll vdShow
ghsList
printBatteryAge
cfgPhyList
hwLogShow
excLogShow
spmShowMaps
spmShow
getObjectGraph_MT 1
getObjectGraph_MT 4
getObjectGraph_MT 8
ccmStateAnalyze 8
第 26 页 共 78 页
fcDevs 1
i
fc 111
hdd 5
fcAll
socShow
showEnclosures
showEnclosuresPage81
unld “ffs:Debug”收起
loadDebug
moduleList
arrayPrintSummary
netCfgShow
inetstatShow
cfgUnitList
vdAll vdShow
ghsList
printBatteryAge
cfgPhyList
hwLogShow
excLogShow
spmShowMaps
spmShow
getObjectGraph_MT 1
getObjectGraph_MT 4
getObjectGraph_MT 8
ccmStateAnalyze 8
第 26 页 共 78 页
fcDevs 1
i
fc 111
hdd 5
fcAll
socShow
showEnclosures
showEnclosuresPage81
unld “ffs:Debug”收起
浏览2257
excLogShow 如下信息：
================= EXCEPTION LOG =================
Serial number: SP73433418
Entry count: 2
Wrap-arounds: 0
First entry time:
Current date/time: JUN-23-2010 01:44:09 AM
---- Log Entry #0 JUN-22-2010 03:04:32 AM ----
RPA Memory Multi-Bit ECC Error in DRAM Channel 2 (addr latch=0x00000807)
Stack Trace:
usage: stackShow( tcb, [framePointer], [should be zero],
[instructionPointer], [printToLog] )
---- Log Entry #1 JUN-22-2010 03:06:49 AM ----
RPA Memory Multi-Bit ECC Error in DRAM Channel 2 (addr latch=0x00000807)
Stack Trace:
usage: stackShow( tcb, [framePointer], [should be zero],
[instructionPointer], [printToLog] )
value = 1 = 0x1收起
================= EXCEPTION LOG =================
Serial number: SP73433418
Entry count: 2
Wrap-arounds: 0
First entry time:
Current date/time: JUN-23-2010 01:44:09 AM
---- Log Entry #0 JUN-22-2010 03:04:32 AM ----
RPA Memory Multi-Bit ECC Error in DRAM Channel 2 (addr latch=0x00000807)
Stack Trace:
usage: stackShow( tcb, [framePointer], [should be zero],
[instructionPointer], [printToLog] )
---- Log Entry #1 JUN-22-2010 03:06:49 AM ----
RPA Memory Multi-Bit ECC Error in DRAM Channel 2 (addr latch=0x00000807)
Stack Trace:
usage: stackShow( tcb, [framePointer], [should be zero],
[instructionPointer], [printToLog] )
value = 1 = 0x1收起
浏览2151