求助：HA712 一同步就报错

[root@node2:/usr/es/sbin/cluster/etc]# oslevel -s
6100-09-03-1415
[root@node2:/usr/es/sbin/cluster/etc]# tail -20  /etc/hosts
# indicates the beginning of a comment; characters up to the end of the
# line are not interpreted by routines which search this file.  Blank
# lines are allowed.

# Internet Address      Hostname        # Comments
# 192.9.200.1           net0sample      # ethernet name/address
# 128.100.0.1           token0sample    # token ring name/address
# 10.2.0.2              x25sample       # x.25 name/address
# 2000:1:1:1:209:6bff:feee:2b7f         ipv6sample      # ipv6 name/address
#127.0.0.1              loopback localhost      # loopback (lo0) name/address


192.168.8.8     node1
192.168.8.45    node2

172.16.3.100    node1-per
172.16.3.200    node2-per

172.16.3.10     node1-ser
172.16.3.20     node2-ser
[root@node2:/usr/es/sbin/cluster/etc]# ifconfig -a
en0: flags=1e080863,c0
        inet 192.168.8.45 netmask 0xffffff00 broadcast 192.168.8.255
         tcp_sendspace 131072 tcp_recvspace 65536 rfc1323 0
en1: flags=1e080863,c0
        inet 172.16.3.200 netmask 0xffffff00 broadcast 172.16.3.255
         tcp_sendspace 131072 tcp_recvspace 65536 rfc1323 0
lo0: flags=e08084b,c0
        inet 127.0.0.1 netmask 0xff000000 broadcast 127.255.255.255
        inet6 ::1%1/0
         tcp_sendspace 131072 tcp_recvspace 131072 rfc1323 1
[root@node2:/usr/es/sbin/cluster/etc]#

[root@node1:/usr/es/sbin/cluster/etc]# cltopinfo
Cluster Name: my_cluster
Cluster Connection Authentication Mode: Standard
Cluster Message Authentication Mode: None
Cluster Message Encryption: None
Use Persistent Labels for Communication: No
Repository Disk: hdisk3
Cluster IP Address:
There are 2 node(s) and 1 network(s) defined

NODE node1:
        Network net_ether_01
                node2-ser       172.16.3.20
                node1-ser       172.16.3.10
                node1   192.168.8.8

NODE node2:
        Network net_ether_01
                node2-ser       172.16.3.20
                node1-ser       172.16.3.10
                node2   192.168.8.45

Resource Group rg01
        Startup Policy   Online On Home Node Only
        Fallover Policy  Fallover To Next Priority Node In The List
        Fallback Policy  Never Fallback
        Participating Nodes      node1 node2
        Service IP Label                 node1-ser

Resource Group rg02
        Startup Policy   Online On Home Node Only
        Fallover Policy  Fallover To Next Priority Node In The List
        Fallback Policy  Fallback To Higher Priority Node In The List
        Participating Nodes      node2 node1
        Service IP Label                 node2-ser
[root@node1:/usr/es/sbin/cluster/etc]#
[root@node1:/usr/es/sbin/cluster/etc]# clmgr sync cluster               
Saving existing /var/hacmp/clverify/ver_mping/ver_mping.log to /var/hacmp/clverify/ver_mping/ver_mping.log.bak
Verifying clcomd communication, please be patient.
Verifying multicast communication with mping.

/usr/sbin/mping version 1.1
Connecting using IPv4.
Listening on 228.168.101.43/4098:

Replying to mping from 192.168.8.8 bytes=32 seqno=0 ttl=1
Replying to mping from 192.168.8.8 bytes=32 seqno=1 ttl=1
Replying to mping from 192.168.8.8 bytes=32 seqno=2 ttl=1
Replying to mping from 192.168.8.8 bytes=32 seqno=3 ttl=1
Replying to mping from 192.168.8.8 bytes=32 seqno=4 ttl=1
Committing any changes, as required, to all available nodes...
Adding any necessary PowerHA SystemMirror entries to /etc/inittab and /etc/rc.net for IPAT on node node1.

cldare: Configuring a 2 node cluster in AIX may take up to 2 minutes, Please wait.

Verification to be performed on the following:
        Cluster Topology
        Cluster Resources

Retrieving data from available cluster nodes.  This could take a few minutes.

        Start data collection on node node1
        Start data collection on node node2
        Collector on node node2 completed
        Collector on node node1 completed
        Data collection complete

Verifying Cluster Topology...

        Completed 10 percent of the verification checks

WARNING: Multiple communication interfaces are recommended for networks that
use IP aliasing in order to prevent the communication interface from
becoming a single point of failure. There are fewer than the recommended
number of communication interfaces defined on the following node(s) for
the given network(s):

    Node:                                Network:
    ----------------------------------   ----------------------------------
    node1                                net_ether_01                    
    node2                                net_ether_01                    

        Completed 20 percent of the verification checks
        Completed 30 percent of the verification checks

Verifying Cluster Resources...

        Completed 40 percent of the verification checks

WARNING: Application monitors are required for detecting application failures
in order for PowerHA SystemMirror to recover from them.  Application monitors are started
by PowerHA SystemMirror when the resource group in which they participate is activated.
The following application(s), shown with their associated resource group,
do not have an application monitor configured:

  Application Server                Resource Group
  --------------------------------  ---------------------------------
   appActrl                          rg01                           
   appBctrl                          rg02                           
        Completed 50 percent of the verification checks
        Completed 60 percent of the verification checks
        Completed 70 percent of the verification checks
        Completed 80 percent of the verification checks
        Completed 90 percent of the verification checks
        Completed 100 percent of the verification checks

Remember to redo automatic error notification if configuration has changed.

Verification has completed normally.
Timer object autoclverify already exists
ERROR: Creating the cluster in AIX failed. Check output for errors in local cluster configuration, correct them, and try synchronization again.

ERROR: Updating the cluster in AIX failed. Check output for errors in local cluster configuration, correct them, and try synchronization again.


cldare: Error detected during synchronization.


[root@node2:/usr/es/sbin/cluster/etc]#  lssrc -a
Subsystem         Group            PID          Status
portmap          portmap          4456584      active
dpid2            tcpip            4587660      active
hostmibd         tcpip            4653198      active
inetd            tcpip            4718736      active
aixmibd          tcpip            4784274      active
sendmail         mail             3997870      active
syslogd          ras              2556044      active
aso                               4849814      active
platform_agent                    2687010      active
biod             nfs              5374116      active
cimsys                            5177514      active
snmpd            tcpip            6029500      active
rpc.lockd        nfs              5636272      active
qdaemon          spooler          6160586      active
writesrv         spooler          6488262      active
pconsole         system           6291690      active
cas_agent                         6095052      active
clstrmgrES       cluster          6553822      active
clconfd          caa              4391116      active
clcomd           caa              11534448     active
lpd              spooler                       inoperative

还需要哪些信息？我后续贴出来收起