AIX5.3+HA5.5 修改snmp里public后 clstat执行问题
系统环境：AIX 5.3 PowerHA 5.5
使用snmp v3，修改了conf文件里面的public字段，把public改成其他字符串，执行过以下刷新命令startsrc -s hostmibd/aixmibd -a "-c XXX"以及chssys -s snmpmibd/hostmibd/aixmibd -a "-c XXX"，重启过系统，运行cluster并稳定后，clstat无法看到双机状态，clstrmgrES/clinfoES在运行，想请教一下，这种情况如何处理，虽然不影响双机的运行，但还是想解决这个情况，不知道是否还有什么地方需要修改。
使用snmp v3，修改了conf文件里面的public字段，把public改成其他字符串，执行过以下刷新命令startsrc -s hostmibd/aixmibd -a "-c XXX"以及chssys -s snmpmibd/hostmibd/aixmibd -a "-c XXX"，重启过系统，运行cluster并稳定后，clstat无法看到双机状态，clstrmgrES/clinfoES在运行，想请教一下，这种情况如何处理，虽然不影响双机的运行，但还是想解决这个情况，不知道是否还有什么地方需要修改。
8同行回答
浏览3637
解决方法可以参照下面的操作，我就是这样解决的。
$ stopsrc -s clinfoES
$ stopsrc -s snmpd
$ lssrc -ls clstrmgrES | grep "Current state"
=> Only continue if ST_STABLE.
$ ls -d /usr/es/sbin/cluster/etc/objrepos/stage
=> Only continue, if this directory does NOT exist !
$ ls -d /usr/es/sbin/cluster/etc/objrepos/active
=> Only continue, if this directory DOES exist !
$ refresh -s clstrmgrES
$ tail -f /var/hacmp/log/clstrmgr.debug
# (or wherever the cluster manager debug log file resides)
=> Wait for the following messages to appear:
SrcRefresh: Called, state is ST_STABLE
SetupRefresh: Can not access ODM stage directory
SrcRefresh: SetupRefresh() returned -1
ConnectToSnmp(): called, smuxFd is -1, retry count 0
ConnectToSnmp: smux_init returned -1, scheduled retry timer 2882
(the timer value may be different)
$ startsrc -s snmpd
$ tail -f /var/hacmp/log/clstrmgr.debug
# (or wherever the cluster manager debug log file resides)
=> Wait for the following messages to appear:
ConnectToSnmp(): called, smuxFd is -1, retry count 1
ConnectToSnmp: smux_init returned 14
smuxFd is set in wrFds, try smux_simple_open
smux_simple_open ok, try smux_register()
(the retry count may be different)
$ startsrc -s clinfoES收起
$ stopsrc -s clinfoES
$ stopsrc -s snmpd
$ lssrc -ls clstrmgrES | grep "Current state"
=> Only continue if ST_STABLE.
$ ls -d /usr/es/sbin/cluster/etc/objrepos/stage
=> Only continue, if this directory does NOT exist !
$ ls -d /usr/es/sbin/cluster/etc/objrepos/active
=> Only continue, if this directory DOES exist !
$ refresh -s clstrmgrES
$ tail -f /var/hacmp/log/clstrmgr.debug
# (or wherever the cluster manager debug log file resides)
=> Wait for the following messages to appear:
SrcRefresh: Called, state is ST_STABLE
SetupRefresh: Can not access ODM stage directory
SrcRefresh: SetupRefresh() returned -1
ConnectToSnmp(): called, smuxFd is -1, retry count 0
ConnectToSnmp: smux_init returned -1, scheduled retry timer 2882
(the timer value may be different)
$ startsrc -s snmpd
$ tail -f /var/hacmp/log/clstrmgr.debug
# (or wherever the cluster manager debug log file resides)
=> Wait for the following messages to appear:
ConnectToSnmp(): called, smuxFd is -1, retry count 1
ConnectToSnmp: smux_init returned 14
smuxFd is set in wrFds, try smux_simple_open
smux_simple_open ok, try smux_register()
(the retry count may be different)
$ startsrc -s clinfoES收起
浏览4548
没有人了解这块内容么？安全审计的人不在系统的这块上面找麻烦？:Q收起
浏览3517