转别人的 做U盘的AIX安装盘的方法Procedure to create bootable U-Disk 1)plug U-disk in USB port 2)make sure below filesets installed. devices.common.IBM.usb.rte devices.usbif.08025002.rte 3)Configure U-disk #cfgmgr -vl...
显示全部转别人的
做U盘的AIX安装盘的方法
Procedure to create bootable U-Disk
1)plug U-disk in USB port
2)make sure below filesets installed.
devices.common.IBM.usb.rte
devices.usbif.08025002.rte
3)Configure U-disk
#cfgmgr -vl usb0
usbms0 Available 2.3 USB Mass Storage
#lscfg -vl usbms0
usbms0 U78C0.001.DBJA161-D1-T1-L1 USB Mass Storage
Manufacturer................San
Machine Type and Model......Cru
ROM Level.(alterable).......8.01
4)Copy ISO from DVD
#dd if=/dev/cd0 of=/images/AIX61.iso bs=4096k
make sure iso file is in a large file capable file system and has enough space
#dd if=/images/AIX61.iso bs=4096k
Do not use U-disk with write protection switch.AIX will complain the U-disk
is write protected no matter it is write protected or not.(Bug)
Procedure to install from U-disk
1)insert U-disk created in Power computer node USB port
2)activate LPAR to SMS
3)Multiboot -> Select Install/Boot Device -> Select harddisk/USB
I use Sandisk Cruzer Micro 4G and KingMax 8G(which is not in 3 supported U-disk),both
can install OS successfully.
During the installation,no prompt to ask switch 2nd U-disk like DVD installation.
收起