AIX6 支持10Gb网卡绑定吗
AIX6 可以支持p780的 两张 10Gb网卡的网口进行绑定（负载均衡模式），从而形成20Gb带宽的 EtherChannel吗？
有没有Oracle RAC的认证？收起
有没有Oracle RAC的认证？收起
查看其它 16 个回答jiaxu2000的回答
OS的版本也不能太低
(#5708) - 10Gb FCoE PCIe Dual Port Adapter
10 Gb FCoE PCIe Dual Port Adapter (#5708) is a high-performance, 10 Gb, dual port, PCIe Converged Network Adapter (CNA) utilizing SR optics. Each port can provide NIC (Network Interface Card) traffic and Fibre Channel functions simultaneously. CCIN is 2B3B See also feature #5270 for the identical adapter except it has a low profile tail stock.
Highlights
PCIe 2.0 adapter with x8 Gen 1
Convergence Enhanced Ethernet (CEE) supported
SR optical transceiver with LC connection provides up to 300m cable length
Non-volatile error log on the adapter
Supported with AIX and Linux and VIOS for FC and Ethernet NIC.
Supported with IBM i under VIOS for FC and Ethernet NIC
SAN and Network boot support for AIX, Linux
Requires FCoCEE capable switches for full FC+Ethernet capability. Ethernet only functionality if attached to ordinary Ethernet switch.
Utilizes existing cabling that supports 10 Gb SR
Based on Qlogic Converged Network Adapter (CNA)
NPIV support requires VIOS for all OS environments
Configuration maximum when used for NIC traffic (not Fibre Channel usage)
Recommended performance Max assuming high utilization, One adapter per four active processors cores.
Recommended connectivity Max assuming high utilization, two adapters per one physical processor core.
Attributes provided: 10 Gb FCoE PCIe Dual Port Adapter
Attributes required: Open PCIe slot
For 9117-MMA: (#5708)
Minimum required: 0
Maximum allowed: 172 (Initial order maximum: 172)
OS level required:
AIX 5.3 with the 5300-11 Technology Level, or later
AIX 6.1 with the 6100-04 Technology Level, or later
SUSE Linux Enterprise Server 10 Service Pack 3 or later
Red Hat Enterprise Linux 5.4 or later
IBM i - not supported directly (use VIOS)
Initial Order/MES/Both/Supported: Both
CSU: Yes
Return parts MES: No
Note:
VIOS attachment requires VIOS 2.1.2.0 or later
IBM i 6.1.1 or later with VIOS attachment requires VIOS 2.1.2.0 or later support virtual Ethernet (NIC) function.
Minimum firmware level 3.5.0 or later
(#5708) - 10Gb FCoE PCIe Dual Port Adapter
10 Gb FCoE PCIe Dual Port Adapter (#5708) is a high-performance, 10 Gb, dual port, PCIe Converged Network Adapter (CNA) utilizing SR optics. Each port can provide NIC (Network Interface Card) traffic and Fibre Channel functions simultaneously. CCIN is 2B3B See also feature #5270 for the identical adapter except it has a low profile tail stock.
Highlights
PCIe 2.0 adapter with x8 Gen 1
Convergence Enhanced Ethernet (CEE) supported
SR optical transceiver with LC connection provides up to 300m cable length
Non-volatile error log on the adapter
Supported with AIX and Linux and VIOS for FC and Ethernet NIC.
Supported with IBM i under VIOS for FC and Ethernet NIC
SAN and Network boot support for AIX, Linux
Requires FCoCEE capable switches for full FC+Ethernet capability. Ethernet only functionality if attached to ordinary Ethernet switch.
Utilizes existing cabling that supports 10 Gb SR
Based on Qlogic Converged Network Adapter (CNA)
NPIV support requires VIOS for all OS environments
Configuration maximum when used for NIC traffic (not Fibre Channel usage)
Recommended performance Max assuming high utilization, One adapter per four active processors cores.
Recommended connectivity Max assuming high utilization, two adapters per one physical processor core.
Attributes provided: 10 Gb FCoE PCIe Dual Port Adapter
Attributes required: Open PCIe slot
For 9117-MMA: (#5708)
Minimum required: 0
Maximum allowed: 172 (Initial order maximum: 172)
OS level required:
AIX 5.3 with the 5300-11 Technology Level, or later
AIX 6.1 with the 6100-04 Technology Level, or later
SUSE Linux Enterprise Server 10 Service Pack 3 or later
Red Hat Enterprise Linux 5.4 or later
IBM i - not supported directly (use VIOS)
Initial Order/MES/Both/Supported: Both
CSU: Yes
Return parts MES: No
Note:
VIOS attachment requires VIOS 2.1.2.0 or later
IBM i 6.1.1 or later with VIOS attachment requires VIOS 2.1.2.0 or later support virtual Ethernet (NIC) function.
Minimum firmware level 3.5.0 or later
浏览2312