帮忙看看clstat不能用
# /usr/sbin/cluster/clstat
Failed retrieving cluster information.
There are a number of possible causes:
clinfoES or snmpd subsystems are not active.
snmp is unresponsive.
snmp is not configured correctly.
Cluster services are not active on any nodes.
Refer to the HACMP Administration Guide for more information.
#
我已经重启了snmpd 查看clinfoES已经启动，但还是不能有。不明白。
Failed retrieving cluster information.
There are a number of possible causes:
clinfoES or snmpd subsystems are not active.
snmp is unresponsive.
snmp is not configured correctly.
Cluster services are not active on any nodes.
Refer to the HACMP Administration Guide for more information.
#
我已经重启了snmpd 查看clinfoES已经启动，但还是不能有。不明白。
12同行回答
bug
解决办法：
/etc/snmpdv3.conf文件已经修改，
增加如下粗体内容：
#VACM_VIEW defaultView internet - included -
VACM_VIEW defaultView 1.3.6.1.4.1.2.2.1.1.1.0 - included -
VACM_VIEW defaultView 1.3.6.1.4.1.2.6.191.1.6 - included -
VACM_VIEW defaultView 1.3.6.1.4.1.2.3.1.2.1.5 - included -
smux 1.3.6.1.4.1.2.3.1.2.1.5clsmuxpd_password #PowerHA SystemMirror/ES for AIX clsmuxpd
修改为：smux 1.3.6.1.4.1.2.3.1.2.1.5clsmuxpd_password
#stopsrc -s snmpd
#startsrc -s snmpd
#sleep 120收起
解决办法：
/etc/snmpdv3.conf文件已经修改，
增加如下粗体内容：
#VACM_VIEW defaultView internet - included -
VACM_VIEW defaultView 1.3.6.1.4.1.2.2.1.1.1.0 - included -
VACM_VIEW defaultView 1.3.6.1.4.1.2.6.191.1.6 - included -
VACM_VIEW defaultView 1.3.6.1.4.1.2.3.1.2.1.5 - included -
smux 1.3.6.1.4.1.2.3.1.2.1.5clsmuxpd_password #PowerHA SystemMirror/ES for AIX clsmuxpd
修改为：smux 1.3.6.1.4.1.2.3.1.2.1.5clsmuxpd_password
#stopsrc -s snmpd
#startsrc -s snmpd
#sleep 120收起
就是啊...收起
浏览2844
将这行的注释删除试试，即
#COMMUNITY public public noAuthNoPriv 0.0.0.0 0.0.0.0 -
改成
COMMUNITY public public noAuthNoPriv 0.0.0.0 0.0.0.0 -
然后
# stopsrc -s snmpd
# stopsrc -s clinfoES
# sleep 120
# startsrc -s clinfoES
# startsrc -s snmpd
# sleep 120收起
#COMMUNITY public public noAuthNoPriv 0.0.0.0 0.0.0.0 -
改成
COMMUNITY public public noAuthNoPriv 0.0.0.0 0.0.0.0 -
然后
# stopsrc -s snmpd
# stopsrc -s clinfoES
# sleep 120
# startsrc -s clinfoES
# startsrc -s snmpd
# sleep 120收起
浏览4109
重启一下机器再试试！！注意这行smux 1.3.6.1.4.1.2.3.1.2.1.5clsmuxpd_password #PowerHA SystemMirror ...zwz99999 发表于 2012-6-25 16:46
现在解决了没有？重启一下应该可以。LZ，你安装powerHA软件和补丁有没有重启？...重启一下机器再试试！！
注意这行
smux 1.3.6.1.4.1.2.3.1.2.1.5clsmuxpd_password #PowerHA SystemMirror ...
zwz99999 发表于 2012-6-25 16:46
现在解决了没有？
重启一下应该可以。LZ，你安装powerHA软件和补丁有没有重启？收起
浏览4178
重启一下机器再试试！！
注意这行
smux 1.3.6.1.4.1.2.3.1.2.1.5clsmuxpd_password #PowerHA SystemMirror/ES for AIX clsmuxpd
是把
#PowerHA SystemMirror/ES for AIX clsmuxpd删掉好像
就是不换行，删除#PowerHA SystemMirror/ES for AIX clsmuxpd收起
注意这行
smux 1.3.6.1.4.1.2.3.1.2.1.5clsmuxpd_password #PowerHA SystemMirror/ES for AIX clsmuxpd
是把
#PowerHA SystemMirror/ES for AIX clsmuxpd删掉好像
就是不换行，删除#PowerHA SystemMirror/ES for AIX clsmuxpd收起
浏览4161
# snmpinfo -m dump -v -o /usr/es/sbin/cluster/hacmp.defs
两台机器都执行查询命令，看看没有报错说明，没有说明设置生效。收起
两台机器都执行查询命令，看看没有报错说明，没有说明设置生效。收起
浏览4145
# sleep 120
# #
#
# /usr/sbin/cluster/clstat
Failed retrieving cluster information.
There are a number of possible causes:
clinfoES or snmpd subsystems are not active.
snmp is unresponsive.
snmp is not configured correctly.
Cluster services are not active on any nodes.
Refer to the HACMP Administration Guide for more information.
# startsrc -s clinfoES
0513-029 The clinfoES Subsystem is already active.
Multiple instances are not supported.
# stopsrc -s clinfoES
0513-044 The clinfoES Subsystem was requested to stop.
# startsrc -s clinfoES
0513-059 The clinfoES Subsystem has been started. Subsystem PID is 8323312.
# /usr/sbin/cluster/clstat
Failed retrieving cluster information.
There are a number of possible causes:
clinfoES or snmpd subsystems are not active.
snmp is unresponsive.
snmp is not configured correctly.
Cluster services are not active on any nodes.
Refer to the HACMP Administration Guide for more information.收起
# #
#
# /usr/sbin/cluster/clstat
Failed retrieving cluster information.
There are a number of possible causes:
clinfoES or snmpd subsystems are not active.
snmp is unresponsive.
snmp is not configured correctly.
Cluster services are not active on any nodes.
Refer to the HACMP Administration Guide for more information.
# startsrc -s clinfoES
0513-029 The clinfoES Subsystem is already active.
Multiple instances are not supported.
# stopsrc -s clinfoES
0513-044 The clinfoES Subsystem was requested to stop.
# startsrc -s clinfoES
0513-059 The clinfoES Subsystem has been started. Subsystem PID is 8323312.
# /usr/sbin/cluster/clstat
Failed retrieving cluster information.
There are a number of possible causes:
clinfoES or snmpd subsystems are not active.
snmp is unresponsive.
snmp is not configured correctly.
Cluster services are not active on any nodes.
Refer to the HACMP Administration Guide for more information.收起
浏览4245