P570上加网卡,状态位defined...求救
我在P570的PIC-X插槽上新加上5706(PN号:00P1631)网卡,然后把网卡加到分区里面
但lsdev | grep ent 显示为defined状态.用rmdev -dl entxx 后cfgmgr -v 也是defined状态
请问是什么原因呢
我在另一台P570(原有5706网卡)里面查看lscfg -vpl entXX显示PN号:00P4289,
是不是跟5706的网卡的PN号不同有关系呢
今天用cfgmgr -i /dev/cd0,显示一下错误,是什么原因呢?
(注:此网卡在P520上测试是能识别到的..就是available状态)
#cfgmgr]root@OTMAPP:/]#cfgmgr -i /dev/cd0
Method error (/usr/lib/methods/cfggoent -l ent0 ):
0514-040 Error initializing a device into the kernel.
Method error (/usr/lib/methods/cfggoent -l ent2 ):
0514-040 Error initializing a device into the kernel.
但lsdev | grep ent 显示为defined状态.用rmdev -dl entxx 后cfgmgr -v 也是defined状态
请问是什么原因呢
我在另一台P570(原有5706网卡)里面查看lscfg -vpl entXX显示PN号:00P4289,
是不是跟5706的网卡的PN号不同有关系呢
今天用cfgmgr -i /dev/cd0,显示一下错误,是什么原因呢?
(注:此网卡在P520上测试是能识别到的..就是available状态)
#cfgmgr]root@OTMAPP:/]#cfgmgr -i /dev/cd0
Method error (/usr/lib/methods/cfggoent -l ent0 ):
0514-040 Error initializing a device into the kernel.
Method error (/usr/lib/methods/cfggoent -l ent2 ):
0514-040 Error initializing a device into the kernel.
17同行回答
thank you very much收起
浏览2487
0514-072 Device cannot be configured because firmware has not
allocated resources for it.收起
allocated resources for it.收起
浏览4120
附上cfgmgr -v的信息
[root@OTMAPP:/]#cfgmgr -v
................................前面省略
****************** stdout ***********
ent1
ent3
****************** no stderr ***********
----------------
Time: 5 LEDS: 0x539
Number of running methods: 0
----------------
attempting to configure device 'pci4'
Time: 5 LEDS: 0x78a
invoking /usr/lib/methods/cfgbus_pcic -l pci4
Number of running methods: 1
----------------
Completed method for: pci4, Elapsed time = 1
return code = 0
****************** stdout ***********
ent0,ent2
****************** no stderr ***********
----------------
Time: 6 LEDS: 0x539
Number of running methods: 0
----------------
attempting to configure device 'ent1'
Time: 6 LEDS: 0x2586
invoking /usr/lib/methods/cfgheaport -l ent1
Number of running methods: 1
----------------
attempting to configure device 'ent3'
Time: 6 LEDS: 0x2586
invoking /usr/lib/methods/cfgheaport -l ent3
Number of running methods: 2
----------------
attempting to configure device 'ent0'
Time: 6 LEDS: 0x25c3
invoking /usr/lib/methods/cfggoent -l ent0
Number of running methods: 3
----------------
attempting to configure device 'ent2'
Time: 6 LEDS: 0x25c3
invoking /usr/lib/methods/cfggoent -l ent2
Number of running methods: 4
----------------
Completed method for: ent1, Elapsed time = 0
return code = 0
****************** no stdout ***********
****************** no stderr ***********
----------------
Time: 6 LEDS: 0x25c3 for ent2
Number of running methods: 3
----------------
Completed method for: ent3, Elapsed time = 0
return code = 0
****************** no stdout ***********
****************** no stderr ***********
----------------
Time: 6 LEDS: 0x25c3 for ent2
Number of running methods: 2
----------------
Completed method for: ent2, Elapsed time = 0
return code = 72
****************** no stdout ***********
****************** no stderr ***********
Method error (/usr/lib/methods/cfggoent -l ent2 ):
0514-072 Device cannot be configured because firmware has not
allocated resources for it.
----------------
Time: 6 LEDS: 0x25c3 for ent0
Number of running methods: 1
----------------
Completed method for: ent0, Elapsed time = 2
return code = 40
****************** no stdout ***********
****************** no stderr ***********
Method error (/usr/lib/methods/cfggoent -l ent0 ):
0514-040 Error initializing a device into the kernel.
----------------
Time: 8 LEDS: 0x539
Number of running methods: 0
...............后面省略收起
[root@OTMAPP:/]#cfgmgr -v
................................前面省略
****************** stdout ***********
ent1
ent3
****************** no stderr ***********
----------------
Time: 5 LEDS: 0x539
Number of running methods: 0
----------------
attempting to configure device 'pci4'
Time: 5 LEDS: 0x78a
invoking /usr/lib/methods/cfgbus_pcic -l pci4
Number of running methods: 1
----------------
Completed method for: pci4, Elapsed time = 1
return code = 0
****************** stdout ***********
ent0,ent2
****************** no stderr ***********
----------------
Time: 6 LEDS: 0x539
Number of running methods: 0
----------------
attempting to configure device 'ent1'
Time: 6 LEDS: 0x2586
invoking /usr/lib/methods/cfgheaport -l ent1
Number of running methods: 1
----------------
attempting to configure device 'ent3'
Time: 6 LEDS: 0x2586
invoking /usr/lib/methods/cfgheaport -l ent3
Number of running methods: 2
----------------
attempting to configure device 'ent0'
Time: 6 LEDS: 0x25c3
invoking /usr/lib/methods/cfggoent -l ent0
Number of running methods: 3
----------------
attempting to configure device 'ent2'
Time: 6 LEDS: 0x25c3
invoking /usr/lib/methods/cfggoent -l ent2
Number of running methods: 4
----------------
Completed method for: ent1, Elapsed time = 0
return code = 0
****************** no stdout ***********
****************** no stderr ***********
----------------
Time: 6 LEDS: 0x25c3 for ent2
Number of running methods: 3
----------------
Completed method for: ent3, Elapsed time = 0
return code = 0
****************** no stdout ***********
****************** no stderr ***********
----------------
Time: 6 LEDS: 0x25c3 for ent2
Number of running methods: 2
----------------
Completed method for: ent2, Elapsed time = 0
return code = 72
****************** no stdout ***********
****************** no stderr ***********
Method error (/usr/lib/methods/cfggoent -l ent2 ):
0514-072 Device cannot be configured because firmware has not
allocated resources for it.
----------------
Time: 6 LEDS: 0x25c3 for ent0
Number of running methods: 1
----------------
Completed method for: ent0, Elapsed time = 2
return code = 40
****************** no stdout ***********
****************** no stderr ***********
Method error (/usr/lib/methods/cfggoent -l ent0 ):
0514-040 Error initializing a device into the kernel.
----------------
Time: 8 LEDS: 0x539
Number of running methods: 0
...............后面省略收起
浏览3601