有HP高手吗？请帮忙看看RX2660的错误，求解

IPMI Event Code: A080124900E00140 0000000000000000

Record Type         = E0h
Reporting Entity ID = System Firmware - cabinet 0, cell slot 0, cpu 0
Event ID            = #4681

...........................................................

Keyword             = BOOT_STOP_BOOT_OVERRIDE   

Description:

The user has manually bypassed a stop boot condition (caused by an error during boot) and continued to boot an O/S. The system might experience unpredictable failures.

Cause / Action:

The user has initiated manual O/S boot despite the existence of a error.



Recommendation:

Correct the error condition (see output of "INFO WARNING" EFI shell command), reboot the system, and then initiate O/S boot.

___________________________________________________________

Timestamp flag      = 1  - The next record is the timestamp for this one
Alert Level         = 5  - Critical               
Data Type           = 0  - Data field unused                           
Data                = 00 00 00 00 00 00 00 00
_______________________________________________________________________________



IPMI Event Code: C14F6500C5020130 FF3F4070000F0300

Timestamp (GMT)   = Sat Mar 17 21:23:17 2012
Generator id: System Software ID = 0
Event message format = IPMI version 1.0

Sensor                             
Number     Triplet      Data 2      Data 3
------    --------      ------      ------
   00      0F:70:40        3F          FF

Decoding as system type: Merlion                     

Sensor Number : Various, refer to manual        
Sensor Type   = System Firmware Progress (aka POST Error)
Event type    = Assertion event : OEM defined
    System Firmware Error (POST Error)
      reserved                                                                                       
___________________________________________________________

Alert Level         = 5  - Critical               
_______________________________________________________________________________



IPMI Event Code: 778002F100E00110 0000000000000000

Record Type         = E0h
Reporting Entity ID = System Firmware - cabinet 0, cell slot 0, cpu 0
Event ID            = #753

...........................................................

Keyword             = EFI_SYSID_INVALID   

Description:

The system ID(s) currently in the system is either invalid or, if the EFI_SYSID_BMC_WARNING, EFI_SYSID_BMC_READ_ERROR or EFI_SYSID_BMC_WRITE_ERROR events are also present, inaccessible to the system firmware. A stop boot condition will be generated and software license will probably be invalid.

Data Field: 64-bit value.

If preceded by 0xbad00000000000 the following valid values are possible:

0000 -> valid UUID (should never see this one)

0001 -> magic UUID

0002 -> inaccessible UUID

0004 -> invalid (bad CRC) UUID

If zero, then one of the following conditions occurred:

Invalid combination of primary and secondary system ID values

User declined copying/entering system ID values when prompted by firmware

All other values indicate failure during attempt to update system IDs.

Cause / Action:

The system ID(s) is invalid and the user did not elect to fix the problem.



Recommendation:

Reboot the system and follow the prompts to fix the issue.

----- WTEC Note -------------------------------------------

Note :
Primary System ID resides on the system board         
Invalid System Type, SystemType = 10
Can't say where Secondary System ID is stored

For additional information, including how to resolve these errors, refer to
http://wtec.cup.hp.com/~cpuhw/IA64/cookbook/sysid_loc.htm
___________________________________________________________

Timestamp flag      = 1  - The next record is the timestamp for this one
Alert Level         = 3  - Warning or non-critical
Data Type           = 23 - Status return from function call            
Data                = 00 00 00 00 00 00 00 00

看起来是刷BIOS刷出问题了哟！