diag ----->certify好像只是检测硬盘是否可用,没有检测硬盘坏道功能吧,aix是不是会自动扫描坏道啊,一般 ...guguyu7689883 发表于 2011-11-16 16:29
Certify mediaThis task allows the selection of diskette, DVD-RAM media, or hard files to be certified. Normally, t...
显示全部diag ----->certify好像只是检测硬盘是否可用,没有检测硬盘坏道功能吧,aix是不是会自动扫描坏道啊,一般 ...
guguyu7689883 发表于 2011-11-16 16:29
Certify media
This task allows the selection of diskette, DVD-RAM media, or hard files to be certified. Normally, this is done under the following conditions:
To determine the condition of the drive and media
To verify that the media is error-free after a format service aid has been run on the media
Normally, run Certify if after running diagnostics on a drive and its media, no problem is found, but you suspect that a problem still exists.
Hard files can be connected either to a SCSI adapter (non-RAID) or a PCI SCSI RAID adapter. The usage and criteria for a hard file connected to a non-RAID SCSI adapter are different from those for a hard file connected to a PCI SCSI RAID adapter.
Certify media can be used in the following ways:
Certify Diskette
This selection enables you to verify the data written on a diskette. When you select this service aid, a menu asks you to select the type of diskette being verified. The program then reads all of the ID and data fields on the diskette one time and displays the total number of bad sectors found.
收起