GPFS创建失败
[root@NodeA instance]# ./db2cluster_prepare -instance_shared_dev /dev/sdc DBI1446I The db2cluster_prepare command is running.DB2 installation is being initialized. Total number of tasks to be performed: 1 Total estimated time for all tasks...显示全部
[root@NodeA instance]# ./db2cluster_prepare -instance_shared_dev /dev/sdc
DBI1446I The db2cluster_prepare command is running.
DB2 installation is being initialized.
Total number of tasks to be performed: 1
Total estimated time for all tasks to be performed: 60 second(s)
Task #1 start
Description: Creating IBM General Parallel File System (GPFS) Cluster and Filesystem
Estimated time 60 second(s)
Task #1 end
A major error occurred during the execution that caused this program to
terminate prematurely. If the problem persists, contact your technical service
representative.
For more information see the DB2 installation log at
"/tmp/db2cluster_prepare.log".
DBI1264E This program failed. Errors encountered during execution were
written to the installation log file. Program name:
db2cluster_prepare. Log file name: /tmp/db2cluster_prepare.log.
Explanation:
This message is returned when some processes and operations have failed.
Detailed information about the error was written to the log file.
User response:
Contact IBM support to get assistance in resolving this issue. Keep the
log file intact as this file is an important reference for IBM support.
Related information:
Contacting IBM Software Support
以下是/tmp/db2cluster_prepare.log的内容：
vi /tmp/db2cluster_prepare.log
DB2 Setup log file started at: Wed Apr 22 02:39:49 AM 2015 PDT
============================================================
Operating system information: Linux 2.6.32-431.el6.x86_64.#1 SMP Sun Nov 10 22:19:54 EST 2013 x86_64
DB2 cluster services:
DB2 cluster file system device path: /dev/sdc
ERROR: The shared file system cluster could not be created. Check the diagnostic logs for more information.
A diagnostic log has been saved to '/tmp/ibm.db2.cluster.uaBtxE'.
ERROR: DBI20027E The GPFS cluster creation failed on host "NodeA". Failed
command: "/opt/ibm/db2/V10.5/bin/db2cluster -create -cfs -host NodeA -domain
db2cluster_20150422024016 -disk /dev/sdc".
Creation of the IBM General Parallel File System (GPFS) cluster failed on the
host "NodeA". The instance is not created.
Creating IBM General Parallel File System (GPFS) Cluster and Filesystem :.......Failure
Post-installation instructions
-------------------------------
Required steps:
There were some errors detected during DB2 installation. To collect the information files from the system, run the "db2support -install" command with the proper options before reporting the problem to IBM service. For information regarding the usage of the db2support tool, check the DB2 Information Center.
DB2 Setup log file finished at: Wed Apr 22 02:40:27 AM 2015 PDT
============================================================
以下是 /tmp/ibm.db2.cluster.uaBtxE的信息
vi /tmp/ibm.db2.cluster.uaBtxE
2015-04-22-02.40.17.824224-420 I1E1689 LEVEL: Event
PID : 6789 TID : 139769785186080 PROC : db2cluster
INSTANCE: NODE : 000
HOSTNAME: NodeA
FUNCTION: DB2 UDB, RAS/PD component, pdLogInternal, probe:120
START : New Diagnostic Log file
DATA #1 : Build Level, 232 bytes
Instance "" uses "64" bits and DB2 code release "SQL10055"
with level identifier "0606010E".
Informational tokens are "DB2 v10.5.0.5", "s141128", "IP23633", Fix Pack "5".
DATA #2 : System Info, 664 bytes
System: Linux NodeA 6 2 x86_64
CPU: total:1 online:1 Cores per socket:1 Threading degree per core:1 SIMD:Y
CPU binding: not in use
Physical Memory(MB): total:1870 free:1187
Virtual Memory(MB): total:5870 free:5187
Swap Memory(MB): total:4000 free:4000
Kernel Params: msgMaxMessageSize:65536 msgMsgMap:65536 msgMaxQueueIDs:3732
msgNumberOfHeaders:65536 msgMaxQueueSize:65536
msgMaxSegmentSize:16 shmMax:68719476736 shmMin:1 shmIDs:4096
shmSegments:4096 semMap:32000 semIDs:128 semNum:32000
semUndo:32000 semNumPerID:250 semOps:32 semUndoSize:20
semMaxVal:32767 semAdjustOnExit:32767
Cur cpu time limit (seconds) = 0xFFFFFFFFFFFFFFFF
Cur file size limit (bytes) = 0xFFFFFFFFFFFFFFFF
Cur data size (bytes) = 0xFFFFFFFFFFFFFFFF
Cur stack size (bytes) = 0x0000000000A00000
Cur core size (bytes) = 0x0000000000000000
Cur memory size (bytes) = 0xFFFFFFFFFFFFFFFF
nofiles (descriptors) = 0x0000000000000400
Cur maximum number of processes = 0x00000000000039CA
Information in this record is only valid at the time when this file was
created (see this record's time stamp)
2015-04-22-02.40.17.870089-420 I1691E367 LEVEL: Info
PID : 6789 TID : 139769785186080 PROC : db2cluster
INSTANCE: NODE : 000
HOSTNAME: NodeA
FUNCTION: <0>, <0>, <0>, probe:2595
DATA #1 : String, 108 bytes
/opt/ibm/db2/V10.5/bin/db2cluster -create -cfs -host NodeA -domain db2cluster_20150422024016 -disk /dev/sdc
2015-04-22-02.40.18.048593-420 E2059E1373 LEVEL: Severe
PID : 6789 TID : 139769785186080 PROC : db2cluster
INSTANCE: NODE : 000
HOSTNAME: NodeA
FUNCTION: DB2 UDB, high avail services, sqlhaExecuteCommandLocal, probe:1264
DATA #1 : String, 25 bytes
/var/db2/db2ssh/db2locssh
DATA #2 : String, 19 bytes
root@NodeA hostname
DATA #3 : signed integer, 8 bytes
6
DATA #4 : unsigned integer, 4 bytes
6790
DATA #5 : Boolean, 1 bytes
true
DATA #6 : unsigned integer, 8 bytes
0
DATA #7 : SQLHA Remote Command Output, PD_TYPE_SQLHA_COMMAND_RESPONSE, 3508 bytes
commandResponse->callRC: 0x00000000
commandResponse->output: NOT_POPULATED
DATA #8 : Hex integer, 4 bytes
0x00000000
DATA #9 : Hex integer, 4 bytes
0x000000FF
CALLSTCK: (Static functions may not be resolved correctly, as they are resolved to the nearest symbol)
[0] 0x000000000051B1B4 _Z24sqlhaExecuteCommandLocalPcS_P22SQLHA_COMMAND_RESPONSEmb + 0x544
[1] 0x0000000000518AAE sqlhaIsDB2RootlessSSHConfigured + 0xBE
[2] 0x000000000056B967 sqlhaCFSCreateDomain + 0x17
[3] 0x0000000000487433 _Z22sqlhaUICreateCFSDomainP9sqlhaUICB + 0x253
[4] 0x000000000049BB40 _Z20sqlhaUICreateDomainsP9sqlhaUICBm + 0x2B0
[5] 0x0000000000426B99 main + 0x1489
[6] 0x00007F1EABDBAD1D __libc_start_main + 0xFD
[7] 0x0000000000425679 /opt/ibm/db2/V10.5/bin/db2cluster + 0x25679
2015-04-22-02.40.18.104907-420 E3433E631 LEVEL: Warning
PID : 6789 TID : 139769785186080 PROC : db2cluster
INSTANCE: NODE : 000
HOSTNAME: NodeA
FUNCTION: DB2 UDB, high avail services, sqlhaIsDB2RootlessSSHConfigured, probe:94
RETCODE : ZRC=0x820001A9=-2113928791=SQLZ_RC_HA_COMMAND_EXECUTION_FAILED
"An error occurred while executing an HA command."
DATA #1 : String, 5 bytes
NodeA
DATA #2 : String, 19 bytes
root@NodeA hostname
DATA #3 : String, 0 bytes
Object not dumped: Address: 0x00007FFF6534C594 Size: 0 Reason: Zero-length data
DATA #4 : Boolean, 1 bytes
false
2015-04-22-02.40.18.154252-420 I4065E486 LEVEL: Warning
PID : 6789 TID : 139769785186080 PROC : db2cluster
INSTANCE: NODE : 000
HOSTNAME: NodeA
FUNCTION: DB2 UDB, high avail services, sqlhaIsDB2RootlessSSHConfigured, probe:108
MESSAGE : ZRC=0x820001A9=-2113928791=SQLZ_RC_HA_COMMAND_EXECUTION_FAILED
"An error occurred while executing an HA command."
DATA #1 : String, 44 bytes
db2ssh is not available, falling back to ssh
2015-04-22-02.40.27.567108-420 I4552E452 LEVEL: Severe
PID : 6789 TID : 139769785186080 PROC : db2cluster
INSTANCE: NODE : 000
HOSTNAME: NodeA
FUNCTION: DB2 UDB, high avail services, sqlhaCFSCallFunctionDirect, probe:114
MESSAGE : ECF=0x90000608=-1879046648=ECF_SQLHA_INVALID_DISK
A disk is not valid.
DATA #1 : String, 22 bytes
DB2CFS function error.
DATA #2 : signed integer, 4 bytes
31
2015-04-22-02.40.27.604602-420 I5005E354 LEVEL: Error
PID : 6789 TID : 139769785186080 PROC : db2cluster
INSTANCE: NODE : 000
HOSTNAME: NodeA
FUNCTION: DB2 UDB, high avail services, sqlhaUICreateCFSDomain, probe:144
MESSAGE : ECF=0x9000052E=-1879046866=ECF_SQLHA_FAILED
SQLHA API call error
2015-04-22-02.40.27.605052-420 I5360E399 LEVEL: Warning
PID : 6789 TID : 139769785186080 PROC : db2cluster
INSTANCE: NODE : 000
HOSTNAME: NodeA
FUNCTION: DB2 UDB, oper system services, sqloMessage, probe:1
MESSAGE : Cannot obtain registry variables
DATA #1 : Hexdump, 4 bytes
0x00007FFF6534B4D8 : B400 0F87 ....
2015-04-22-02.40.27.638055-420 E5760E353 LEVEL: Error
PID : 6789 TID : 139769785186080 PROC : db2cluster
INSTANCE: NODE : 000
HOSTNAME: NodeA
FUNCTION: DB2 UDB, high avail services, sqlhaUICreateDomains, probe:1178
RETCODE : ECF=0x9000052E=-1879046866=ECF_SQLHA_FAILED
SQLHA API call error
2015-04-22-02.40.27.638512-420 E6114E343 LEVEL: Error
PID : 6789 TID : 139769785186080 PROC : db2cluster
INSTANCE: NODE : 000
HOSTNAME: NodeA
FUNCTION: DB2 UDB, high avail services, sqlhaUIMain, probe:624
MESSAGE : ECF=0x9000052E=-1879046866=ECF_SQLHA_FAILED
SQLHA API call error
本次收集信息如此之详细，请专家们诊断下，帮忙找出原因，安装DB2 PURESCALE已经困扰我太久了。收起
DBI1446I The db2cluster_prepare command is running.
DB2 installation is being initialized.
Total number of tasks to be performed: 1
Total estimated time for all tasks to be performed: 60 second(s)
Task #1 start
Description: Creating IBM General Parallel File System (GPFS) Cluster and Filesystem
Estimated time 60 second(s)
Task #1 end
A major error occurred during the execution that caused this program to
terminate prematurely. If the problem persists, contact your technical service
representative.
For more information see the DB2 installation log at
"/tmp/db2cluster_prepare.log".
DBI1264E This program failed. Errors encountered during execution were
written to the installation log file. Program name:
db2cluster_prepare. Log file name: /tmp/db2cluster_prepare.log.
Explanation:
This message is returned when some processes and operations have failed.
Detailed information about the error was written to the log file.
User response:
Contact IBM support to get assistance in resolving this issue. Keep the
log file intact as this file is an important reference for IBM support.
Related information:
Contacting IBM Software Support
以下是/tmp/db2cluster_prepare.log的内容：
vi /tmp/db2cluster_prepare.log
DB2 Setup log file started at: Wed Apr 22 02:39:49 AM 2015 PDT
============================================================
Operating system information: Linux 2.6.32-431.el6.x86_64.#1 SMP Sun Nov 10 22:19:54 EST 2013 x86_64
DB2 cluster services:
DB2 cluster file system device path: /dev/sdc
ERROR: The shared file system cluster could not be created. Check the diagnostic logs for more information.
A diagnostic log has been saved to '/tmp/ibm.db2.cluster.uaBtxE'.
ERROR: DBI20027E The GPFS cluster creation failed on host "NodeA". Failed
command: "/opt/ibm/db2/V10.5/bin/db2cluster -create -cfs -host NodeA -domain
db2cluster_20150422024016 -disk /dev/sdc".
Creation of the IBM General Parallel File System (GPFS) cluster failed on the
host "NodeA". The instance is not created.
Creating IBM General Parallel File System (GPFS) Cluster and Filesystem :.......Failure
Post-installation instructions
-------------------------------
Required steps:
There were some errors detected during DB2 installation. To collect the information files from the system, run the "db2support -install" command with the proper options before reporting the problem to IBM service. For information regarding the usage of the db2support tool, check the DB2 Information Center.
DB2 Setup log file finished at: Wed Apr 22 02:40:27 AM 2015 PDT
============================================================
以下是 /tmp/ibm.db2.cluster.uaBtxE的信息
vi /tmp/ibm.db2.cluster.uaBtxE
2015-04-22-02.40.17.824224-420 I1E1689 LEVEL: Event
PID : 6789 TID : 139769785186080 PROC : db2cluster
INSTANCE: NODE : 000
HOSTNAME: NodeA
FUNCTION: DB2 UDB, RAS/PD component, pdLogInternal, probe:120
START : New Diagnostic Log file
DATA #1 : Build Level, 232 bytes
Instance "" uses "64" bits and DB2 code release "SQL10055"
with level identifier "0606010E".
Informational tokens are "DB2 v10.5.0.5", "s141128", "IP23633", Fix Pack "5".
DATA #2 : System Info, 664 bytes
System: Linux NodeA 6 2 x86_64
CPU: total:1 online:1 Cores per socket:1 Threading degree per core:1 SIMD:Y
CPU binding: not in use
Physical Memory(MB): total:1870 free:1187
Virtual Memory(MB): total:5870 free:5187
Swap Memory(MB): total:4000 free:4000
Kernel Params: msgMaxMessageSize:65536 msgMsgMap:65536 msgMaxQueueIDs:3732
msgNumberOfHeaders:65536 msgMaxQueueSize:65536
msgMaxSegmentSize:16 shmMax:68719476736 shmMin:1 shmIDs:4096
shmSegments:4096 semMap:32000 semIDs:128 semNum:32000
semUndo:32000 semNumPerID:250 semOps:32 semUndoSize:20
semMaxVal:32767 semAdjustOnExit:32767
Cur cpu time limit (seconds) = 0xFFFFFFFFFFFFFFFF
Cur file size limit (bytes) = 0xFFFFFFFFFFFFFFFF
Cur data size (bytes) = 0xFFFFFFFFFFFFFFFF
Cur stack size (bytes) = 0x0000000000A00000
Cur core size (bytes) = 0x0000000000000000
Cur memory size (bytes) = 0xFFFFFFFFFFFFFFFF
nofiles (descriptors) = 0x0000000000000400
Cur maximum number of processes = 0x00000000000039CA
Information in this record is only valid at the time when this file was
created (see this record's time stamp)
2015-04-22-02.40.17.870089-420 I1691E367 LEVEL: Info
PID : 6789 TID : 139769785186080 PROC : db2cluster
INSTANCE: NODE : 000
HOSTNAME: NodeA
FUNCTION: <0>, <0>, <0>, probe:2595
DATA #1 : String, 108 bytes
/opt/ibm/db2/V10.5/bin/db2cluster -create -cfs -host NodeA -domain db2cluster_20150422024016 -disk /dev/sdc
2015-04-22-02.40.18.048593-420 E2059E1373 LEVEL: Severe
PID : 6789 TID : 139769785186080 PROC : db2cluster
INSTANCE: NODE : 000
HOSTNAME: NodeA
FUNCTION: DB2 UDB, high avail services, sqlhaExecuteCommandLocal, probe:1264
DATA #1 : String, 25 bytes
/var/db2/db2ssh/db2locssh
DATA #2 : String, 19 bytes
root@NodeA hostname
DATA #3 : signed integer, 8 bytes
6
DATA #4 : unsigned integer, 4 bytes
6790
DATA #5 : Boolean, 1 bytes
true
DATA #6 : unsigned integer, 8 bytes
0
DATA #7 : SQLHA Remote Command Output, PD_TYPE_SQLHA_COMMAND_RESPONSE, 3508 bytes
commandResponse->callRC: 0x00000000
commandResponse->output: NOT_POPULATED
DATA #8 : Hex integer, 4 bytes
0x00000000
DATA #9 : Hex integer, 4 bytes
0x000000FF
CALLSTCK: (Static functions may not be resolved correctly, as they are resolved to the nearest symbol)
[0] 0x000000000051B1B4 _Z24sqlhaExecuteCommandLocalPcS_P22SQLHA_COMMAND_RESPONSEmb + 0x544
[1] 0x0000000000518AAE sqlhaIsDB2RootlessSSHConfigured + 0xBE
[2] 0x000000000056B967 sqlhaCFSCreateDomain + 0x17
[3] 0x0000000000487433 _Z22sqlhaUICreateCFSDomainP9sqlhaUICB + 0x253
[4] 0x000000000049BB40 _Z20sqlhaUICreateDomainsP9sqlhaUICBm + 0x2B0
[5] 0x0000000000426B99 main + 0x1489
[6] 0x00007F1EABDBAD1D __libc_start_main + 0xFD
[7] 0x0000000000425679 /opt/ibm/db2/V10.5/bin/db2cluster + 0x25679
2015-04-22-02.40.18.104907-420 E3433E631 LEVEL: Warning
PID : 6789 TID : 139769785186080 PROC : db2cluster
INSTANCE: NODE : 000
HOSTNAME: NodeA
FUNCTION: DB2 UDB, high avail services, sqlhaIsDB2RootlessSSHConfigured, probe:94
RETCODE : ZRC=0x820001A9=-2113928791=SQLZ_RC_HA_COMMAND_EXECUTION_FAILED
"An error occurred while executing an HA command."
DATA #1 : String, 5 bytes
NodeA
DATA #2 : String, 19 bytes
root@NodeA hostname
DATA #3 : String, 0 bytes
Object not dumped: Address: 0x00007FFF6534C594 Size: 0 Reason: Zero-length data
DATA #4 : Boolean, 1 bytes
false
2015-04-22-02.40.18.154252-420 I4065E486 LEVEL: Warning
PID : 6789 TID : 139769785186080 PROC : db2cluster
INSTANCE: NODE : 000
HOSTNAME: NodeA
FUNCTION: DB2 UDB, high avail services, sqlhaIsDB2RootlessSSHConfigured, probe:108
MESSAGE : ZRC=0x820001A9=-2113928791=SQLZ_RC_HA_COMMAND_EXECUTION_FAILED
"An error occurred while executing an HA command."
DATA #1 : String, 44 bytes
db2ssh is not available, falling back to ssh
2015-04-22-02.40.27.567108-420 I4552E452 LEVEL: Severe
PID : 6789 TID : 139769785186080 PROC : db2cluster
INSTANCE: NODE : 000
HOSTNAME: NodeA
FUNCTION: DB2 UDB, high avail services, sqlhaCFSCallFunctionDirect, probe:114
MESSAGE : ECF=0x90000608=-1879046648=ECF_SQLHA_INVALID_DISK
A disk is not valid.
DATA #1 : String, 22 bytes
DB2CFS function error.
DATA #2 : signed integer, 4 bytes
31
2015-04-22-02.40.27.604602-420 I5005E354 LEVEL: Error
PID : 6789 TID : 139769785186080 PROC : db2cluster
INSTANCE: NODE : 000
HOSTNAME: NodeA
FUNCTION: DB2 UDB, high avail services, sqlhaUICreateCFSDomain, probe:144
MESSAGE : ECF=0x9000052E=-1879046866=ECF_SQLHA_FAILED
SQLHA API call error
2015-04-22-02.40.27.605052-420 I5360E399 LEVEL: Warning
PID : 6789 TID : 139769785186080 PROC : db2cluster
INSTANCE: NODE : 000
HOSTNAME: NodeA
FUNCTION: DB2 UDB, oper system services, sqloMessage, probe:1
MESSAGE : Cannot obtain registry variables
DATA #1 : Hexdump, 4 bytes
0x00007FFF6534B4D8 : B400 0F87 ....
2015-04-22-02.40.27.638055-420 E5760E353 LEVEL: Error
PID : 6789 TID : 139769785186080 PROC : db2cluster
INSTANCE: NODE : 000
HOSTNAME: NodeA
FUNCTION: DB2 UDB, high avail services, sqlhaUICreateDomains, probe:1178
RETCODE : ECF=0x9000052E=-1879046866=ECF_SQLHA_FAILED
SQLHA API call error
2015-04-22-02.40.27.638512-420 E6114E343 LEVEL: Error
PID : 6789 TID : 139769785186080 PROC : db2cluster
INSTANCE: NODE : 000
HOSTNAME: NodeA
FUNCTION: DB2 UDB, high avail services, sqlhaUIMain, probe:624
MESSAGE : ECF=0x9000052E=-1879046866=ECF_SQLHA_FAILED
SQLHA API call error
本次收集信息如此之详细，请专家们诊断下，帮忙找出原因，安装DB2 PURESCALE已经困扰我太久了。收起