HACMP5.4同步问题，急救！！！！
问题描述：
A机 有网卡：ent0 ent1 ent2 ent3 ent5
B机 有网卡：ent0 ent1 ent2 ent3 ent5
HACMP以前配置是：启动地址在ent3和 备用地址是ent5 （两台主机都是）
现在B机的ent3 ent5 由于硬件故障，不能恢复，当前状态不可用了；
于是，就把当前B机的ent3和ent5 上的ip地址修改到ent1 和ent2 ，修改了hacmp的网络拓扑和自由组的相关信息后
结果做hacmp的同步，有报错，如下：
Verification to be performed on the following:
Cluster Topology
Cluster Resources
Retrieving data from available cluster nodes.
This could take a few minutes........
Verifying Cluster Topology...
ERROR: The HACMP adapter en5 is not available on node B_HOST
ERROR: The HACMP adapter en3 is not available on node B_HOST
WARNING: There may be an insufficient number of communication interfaces defined on node: uipdb1, network: net_ether_01.
Multiple communication interfaces are recommended for networks that will use IP aliasing.
WARNING: There may be an insufficient number of communication interfaces defined on node: uipdb2, network: net_ether_01.
Multiple communication interfaces are recommended for networks that will use IP aliasing.
WARNING: There may be an insufficient number of communication interfaces defined on node: uipdb1, network: net_ether_02.
Multiple communication interfaces are recommended for networks that will use IP aliasing.
WARNING: There may be an insufficient number of communication interfaces defined on node: uipdb2, network: net_ether_02.
Multiple communication interfaces are recommended for networks that will use IP aliasing.
Verifying Cluster Resources...
------现在问题是：
1、
A机 有网卡： ent3 ent5
B机 有网卡：ent1 ent2
网卡端口不对应，hacmp可以做吗？
2、如果可以，通过修改哪些选项，可以完成hacmp的同步呢？
A机 有网卡：ent0 ent1 ent2 ent3 ent5
B机 有网卡：ent0 ent1 ent2 ent3 ent5
HACMP以前配置是：启动地址在ent3和 备用地址是ent5 （两台主机都是）
现在B机的ent3 ent5 由于硬件故障，不能恢复，当前状态不可用了；
于是，就把当前B机的ent3和ent5 上的ip地址修改到ent1 和ent2 ，修改了hacmp的网络拓扑和自由组的相关信息后
结果做hacmp的同步，有报错，如下：
Verification to be performed on the following:
Cluster Topology
Cluster Resources
Retrieving data from available cluster nodes.
This could take a few minutes........
Verifying Cluster Topology...
ERROR: The HACMP adapter en5 is not available on node B_HOST
ERROR: The HACMP adapter en3 is not available on node B_HOST
WARNING: There may be an insufficient number of communication interfaces defined on node: uipdb1, network: net_ether_01.
Multiple communication interfaces are recommended for networks that will use IP aliasing.
WARNING: There may be an insufficient number of communication interfaces defined on node: uipdb2, network: net_ether_01.
Multiple communication interfaces are recommended for networks that will use IP aliasing.
WARNING: There may be an insufficient number of communication interfaces defined on node: uipdb1, network: net_ether_02.
Multiple communication interfaces are recommended for networks that will use IP aliasing.
WARNING: There may be an insufficient number of communication interfaces defined on node: uipdb2, network: net_ether_02.
Multiple communication interfaces are recommended for networks that will use IP aliasing.
Verifying Cluster Resources...
------现在问题是：
1、
A机 有网卡： ent3 ent5
B机 有网卡：ent1 ent2
网卡端口不对应，hacmp可以做吗？
2、如果可以，通过修改哪些选项，可以完成hacmp的同步呢？