各位专家，急问，HX5堆叠，报错问题

我之前遇到过相似的问题，最后是蓝快上门换主板解决的！收起

http://www-947.ibm.com/support/entry/portal/docdisplay?lndocid=MIGR-5084743
这是IBM官方网站给的解决方法收起

我碰见过，是你SSD和你的以太网这边冲突。

关闭以太网启动，改变启动顺序收起

在AMM管理界面中的配置过程如下：
1、硬件安装完成后会多出来级联的配置菜单如下图所示
2、选择“configuration”选择连个刀片，然后选择“Create Partion”点击“Perform action”按钮完成分区创建。

之后系统将执行操作

3、上述操作完成后可以启动此两节点的刀片服务器

不配置的话即使已经完成物理链接，在刀片中心里面还是分别的机器，可以单独开关，互相完全没有影响，就像没有链接一样。收起

Error         PCI express bus 1 connector (CFFh Exp) fault        

    Verify that the latest system firmware is installed (see Updating firmware and device drivers).
    Verify that the firmware for the CFFh expansion card is up to date.
    Run the Setup utility and restore system setting to defaults (see Using the Setup utility).
    Check the event logs for other related error messages (see Event logs).
    Reseat the CFFh expansion card (see Removing an I/O expansion card and Installing an I/O expansion card).
    Replace the CFFh expansion card (see Removing an I/O expansion card and Installing an I/O expansion card).
    (Trained service technician only) Replace the system-board assembly (see Removing the system-board assembly - BladeCenter HX5 and Installing the system-board assembly - BladeCenter HX5).

Error         PCI express bus 2 connector (CIOh Exp 2 ) fault        

    Verify that the latest system firmware is installed (see Updating firmware and device drivers).
    Verify that the firmware for the CIOh expansion card is up to date.
    Run the Setup utility and restore system setting to defaults (see Using the Setup utility).
    Check the event logs for other related error messages (see Event logs).
    Reseat the CIOh expansion card (see Removing an I/O expansion card and Installing an I/O expansion card).
    Replace the CIOh expansion card (see Removing an I/O expansion card and Installing an I/O expansion card).
    (Trained service technician only) Replace the system-board assembly (see Removing the system-board assembly - BladeCenter HX5 and Installing the system-board assembly - BladeCenter HX5).

Error         PCI express bus 3 connector (CIOv Exp) fault        

    Verify that the latest system firmware is installed (see Updating firmware and device drivers).
    Verify that the firmware for the CIOv expansion card is up to date.
    Run the Setup utility and restore system setting to defaults (see Using the Setup utility).
    Check the event logs for other related error messages (see Event logs).
    Reseat the CIOv expansion card (see Removing an I/O expansion card and Installing an I/O expansion card).
    Replace the CIOv expansion card (see Removing an I/O expansion card and Installing an I/O expansion card).
    (Trained service technician only) Replace the system-board assembly (see Removing the system-board assembly - BladeCenter HX5 and Installing the system-board assembly - BladeCenter HX5).收起

HX5配置是   2*6C  E7 1.86G/4*8G/1*50G SSDBay 1.8 in收起

HX5的配置是怎么样的？收起