政府机关 PowerHA6.1

检查HAPMC状态,报了几个警告什么意思?

运行/usr/sbin/cluster/diag/clconfig -v '-tr'命令出现几个警告信息,求解释,谢谢WARNING: To prevent the IP stack from being a single-point-of-failure,HACMP recommends a non-IP network topology in which each nodein the cluster can use non-IP networks to rea... 显示全部
运行/usr/sbin/cluster/diag/clconfig -v '-tr'命令出现几个警告信息,求解释,谢谢
WARNING: To prevent the IP stack from being a single-point-of-failure,
HACMP recommends a non-IP network topology in which each node
in the cluster can use non-IP networks to reach all other nodes
in the cluster, either directly or via other nodes. This topology
should be in addition to any configured IP-based networks.
The following node(s) or sets of "non-IP connected" nodes violate
this recommendation:
p720_1
p720_2
It is recommended that these nodes or sets of nodes be inter-connected
via additional non-IP networks, such as RS-232, shared disks for disk
heartbeating, etc.




        Completed 40 percent of the verification checks

Verifying Cluster Resources...

        Completed 50 percent of the verification checks

WARNING: Application monitors are required for detecting application failures
in order for HACMP to recover from them.  Application monitors are started
by HACMP when the resource group in which they participate is activated.
The following application(s), shown with their associated resource group,
do not have an application monitor configured:

   Application Server                Resource Group
   --------------------------------  ---------------------------------
   sybase_server                     sybase_resource                 
        Completed 60 percent of the verification checks
        Completed 70 percent of the verification checks
        Completed 80 percent of the verification checks
        Completed 90 percent of the verification checks
        Completed 100 percent of the verification checks
WARNING: Node p720_1 has cluster.es.nfs.rte installed however grace periods are not fully enabled on this node. Grace periods must be enabled

before NFSv4 stable storage can be used.

HACMP will attempt to fix this opportunistically when acquiring NFS resources on this node however the change won't take effect until the next

time that nfsd is started.

If this warning persists, the administrator should perform the following steps to enable grace periods on p720_1 at the next planned downtime:
  1. stopsrc -s nfsd
  2. smitty nfsgrcperiod
  3. startsrc -s nfsd

WARNING: Node p720_2 has cluster.es.nfs.rte installed however grace periods are not fully enabled on this node. Grace periods must be enabled

before NFSv4 stable storage can be used.

HACMP will attempt to fix this opportunistically when acquiring NFS resources on this node however the change won't take effect until the next

time that nfsd is started.

If this warning persists, the administrator should perform the following steps to enable grace periods on p720_2 at the next planned downtime:
  1. stopsrc -s nfsd
  2. smitty nfsgrcperiod
  3. startsrc -s nfsd


Remember to redo automatic error notification if configuration has changed.

Verification has completed normally. 收起
参与9

查看其它 6 个回答北京荣歆咨询 的回答

北京荣歆咨询 北京荣歆咨询 系统架构师 北京荣歆咨询有限公司
如果仔细读一遍英文,我觉得其中说的比较清楚了。我简单翻译下:
1. 目前HA只配了Ip心跳,这是不建议的。对于HA6.1,可以加配串口或磁盘心跳,都配上更好。
2. 没有设定应用自动监测,这是HA很好的功能。(不过对不同应用检测适应的方法和配置方法不同,目前配的较少)
3. NFS安装了但是没有修改grace period,如果用NFS,就应按提示1.2.3改下“smitty nfsgrcperiod”。
IT咨询服务 · 2015-01-15
浏览2127

回答者

北京荣歆咨询
系统架构师 北京荣歆咨询有限公司
擅长领域: 服务器存储数据库
评论400

北京荣歆咨询 最近回答过的问题

回答状态

  • 发布时间:2015-01-15
  • 关注会员:1 人
  • 回答浏览:2127
  • X社区推广