P550 掉电,系统启动后黄灯消除问题

今天机房掉了两次电.致P550(AIX5.3)启动后亮黄灯,用diag运行报以下错误:The path between the following resources is missing:                 U787B.001.DNW4387-hdisk5      &nbs...显示全部
今天机房掉了两次电.致P550(AIX5.3)启动后亮黄灯,用diag运行报以下错误:
The path between the following resources is missing:
                 U787B.001.DNW4387-
hdisk5           P1-T14-L8-L0        16 Bit LVD SCSI Disk Drive (73400 MB)
                 U787B.001.DNW4387-
scsi0            P1-T14              PCI-X Dual Channel Ultra320 SCSI Adapter
                                     bus
Select an option to resolve the missing path.
  Continue to run diagnostics on the selected resource.
    This selection will leave the path in the system configuration.
  The path has been removed.
    This selection will remove the path from the system configuration.
  The path has not been removed.
    This selection will determine why the path is shown as missing.

各位帮忙看看是不是硬盘有问题了,有什么解决办法?先谢了

[ 本帖最后由 cn_compass 于 2009-4-21 15:59 编辑 ]收起
参与38

查看其它 37 个回答cx9h的回答

cx9hcx9h工程师ibm
机房突然断电后 等机器起来亮黄灯 首先应该进asm看event log 如果系统可以进去可以查errpt 看是否和asm里面的报错对的上号 确认没啥大问题后再消黄灯 消黄灯得方法多了去了 没分区的可以在diag里这么做。。。。
IT分销/经销 · 2011-06-26
浏览2515

回答者

cx9h
工程师ibm
擅长领域: 服务器存储AIX

cx9h 最近回答过的问题

回答状态

  • 发布时间:2011-06-26
  • 关注会员:0 人
  • 回答浏览:2515
  • X社区推广