P550 掉电,系统启动后黄灯消除问题
今天机房掉了两次电.致P550(AIX5.3)启动后亮黄灯,用diag运行报以下错误:
The path between the following resources is missing:
U787B.001.DNW4387-
hdisk5 P1-T14-L8-L0 16 Bit LVD SCSI Disk Drive (73400 MB)
U787B.001.DNW4387-
scsi0 P1-T14 PCI-X Dual Channel Ultra320 SCSI Adapter
bus
Select an option to resolve the missing path.
Continue to run diagnostics on the selected resource.
This selection will leave the path in the system configuration.
The path has been removed.
This selection will remove the path from the system configuration.
The path has not been removed.
This selection will determine why the path is shown as missing.
各位帮忙看看是不是硬盘有问题了,有什么解决办法?先谢了
[ 本帖最后由 cn_compass 于 2009-4-21 15:59 编辑 ]
The path between the following resources is missing:
U787B.001.DNW4387-
hdisk5 P1-T14-L8-L0 16 Bit LVD SCSI Disk Drive (73400 MB)
U787B.001.DNW4387-
scsi0 P1-T14 PCI-X Dual Channel Ultra320 SCSI Adapter
bus
Select an option to resolve the missing path.
Continue to run diagnostics on the selected resource.
This selection will leave the path in the system configuration.
The path has been removed.
This selection will remove the path from the system configuration.
The path has not been removed.
This selection will determine why the path is shown as missing.
各位帮忙看看是不是硬盘有问题了,有什么解决办法?先谢了
[ 本帖最后由 cn_compass 于 2009-4-21 15:59 编辑 ]
38同行回答
机房突然断电后 等机器起来亮黄灯 首先应该进asm看event log 如果系统可以进去可以查errpt 看是否和asm里面的报错对的上号 确认没啥大问题后再消黄灯 消黄灯得方法多了去了 没分区的可以在diag里这么做。。。。收起
浏览2498
學習了～收起
浏览2461
楼主真的是只关心，去除黄灯，而不关心问题到底出在哪里了啊！！这样对一个技术人员可是一个大问题哦！！收起
浏览2453
这个是经常会用到的，巡检过程中需要解决最简单的问题收起
浏览2419