常见报错求解
3D32B80D 0215105111 P S topsvcs NIM thread blocked
9D30B78E 0215105111 T S tty2 RECEIVER OVER-RUN ON INPUT
这2个错误应该是很常见的,无非就是负载过高,如果只是当时报一下错,之后没有报了,系统一切也正常,是不是可以不管?
第一个报错是en2阻塞,这个是走以太网,与心跳无关(因为这里做的是串口心跳)
第二个报错是tty2串口心跳过载,TTY2属性:
TTY tty2
TTY type tty
TTY interface rs232
Description Asynchronous Terminal
Status Available
Location 01-S3-00-00
Parent adapter sa2
PORT number [0] +
Enable LOGIN disable +
BAUD rate [9600] +
PARITY [none] +
BITS per character [8] +
Number of STOP BITS [1] +
TIME before advancing to next port setting [0] +#
TERMINAL type [dumb]
FLOW CONTROL to be used [xon] +
OPEN DISCIPLINE to be used [dtropen] +
STTY attributes for RUN time [hupcl,cread,brkint,icrnl,opost,tab3,onlcr,isig,icanon,echo,echoe,echok,ec> +
STTY attributes for LOGIN [hupcl,cread,echoe,cs8]
LOGGER name []
STATUS of device at BOOT time [available] +
REMOTE reboot ENABLE no +
REMOTE reboot STRING [#@reb@#]
TRANSMIT buffer count [16] +#
RECEIVE trigger level [1] +#
STREAMS modules to be pushed at OPEN time [ldterm] +
INPUT map file [none] +
OUTPUT map file [none] +
CODESET map file [sbcs] +
红色部分那个FLOW CFLOW CONTROL to be used 流控制 属性的几个值分别代表什么意思?
en2以太网阻塞应该和tty2负载高之间没有什么关系吧?