ds4800挂磁盘笼报ESM Configuration Settings Version Misatch的错误
一台1814-70A( Firmware version: 07.15.10.01 )下挂一台1812-81A,报ESM Configuration Settings Version Misatch错误,下面是错误的Recovery Procedure:
ESM Configuration Settings Version Mismatch What Caused the Problem? A drive enclosure in the storage subsystem contains ESM canisters that are reporting different versions of configuration settings. Normally, the software would resolve the mismatch problem by automatically synchronizing the configuration settings between the two ESMs. However, there are conditions which may cause the automatic synchronization to not occur. The Recovery Guru Details area provides specific information you will need as you follow the recovery steps.
Important Note An ESM configuration settings version mismatch can affect how the storage subsystem reports bypassed drives, therefore it is important to correct this problem before attempting to correct any problems associated with bypassed drives.
Recovery Steps 1
From the Subsystem Management Window (AMW), select the Advanced >> Maintenance >> Download >> ESM Configuration Settings option and follow the instructions on the dialog to download the ESM configuration settings configuration file.
2
Select Recheck to rerun the Recovery Guru. The failure should no longer appear in the Summary area. If the failure appears again, contact your technical support representative.
按此操作还是报相同的错误。请求帮助!先谢过了!