mi_zy
作者mi_zy·2011-01-16 13:34
软件开发工程师·民航山西空管分局

关于alt_disk_install的使用

字数 1097阅读 3968评论 2赞 0
我在一台P52A上做了alt_disk_install -O -B -C hdisk1
从hdisk0到hdisk1做替换盘,完成之后将hdisk1拿到一台p615机子上启动,结果报错:没有启动映像,又试验了一遍,在P52A的aix5.3下alt_disk_install -O -C做的硬盘拿到P615上启动,出现提示:
PReP -BOOT : unable to load PReP imge
no oerating systems installed
我把这块硬盘插回P52A小机上,启动正常,以上操作说明alt_disk_install -O -C做的硬盘不能跨平台,如在P52A上做的不能在P615上用。

奇怪!这与说明不符啊,-O参数Performs a device reset on the target
            altinst_rootvg. This will cause
            alt_disk_install to NOT retain any user
            defined device configurations. This flag is
            useful if the target disk or disks will become
            the rootvg of a different system (such as in
            the case of logical partitioning or system
            disk swap).
答案:
安装All devices kernels boundle后再alt_disk_install
 
!!!克隆是不能夸平台的,理论上支持同平台,例如都是POWER5,我们一般是在同一型号机器上才用克隆来作。

如果觉得我的文章对您有用,请点赞。您的支持将鼓励我继续创作!

0

添加新评论2 条评论

jinruiweijinruiwei系统架构师敦阳(宁波)科技有限公司
2012-07-26 18:08
不错的分享
akingzakingz系统工程师东华软件
2011-01-18 22:20
博主这个经验非常有价值
Ctrl+Enter 发表

作者其他文章

X社区推广