P550扩容问题

P550扩内存是不需要激活码的,但建议在升级之前先看看微码或者升级微码,内存每一组最好PN号码是一致的.祝好运收起

回复下，表示我关注此帖，有结果了么?

一组2G插在CPU1上，1组2G插在CPU2上面，加起来8条了，
一组1G插在CPU1上，1组1G插在CPU2上面，试试。收起

检查内存FRU号和批次号，有时不同批次号的内存都不能混插，最好保证同一组里是相同批次号的收起

上面文档是针对P5类550的。收起

回复下，表示我关注过此帖，有文档这样描述，翻译起来好像是要混插：
The model 550 and 720 uses pluggable Dual Inline Memory Modules (DIMMs). Each processor card assembly contains eight DIMM slots.

These memory rules must be observed:

The system must have at least one quad (a group of four DIMMs) installed. This quad must be on a single processor card assembly.
Additional DIMMs must be installed in quads. If two processor card assemblies are present, a second quad should be installed on the second processor card assembly.
Each DIMM in a quad must be of the same type and size. However, if two quads are placed on a CPU card, the quads need not be the same.
The order of placement of DIMMs may vary according to the processor card assembly. Refer to the system documentation for detailed information. However, the following page describes one approach.收起

P550加内存  不要license的  P561  P570级别跟以上级别才要license
configured
貌似 要 celogin用户收起

先升级微码吧，然后再恢复初厂只能折腾了，
插单个CPU板看看啥情况收起

我也遇到这个问题了,升级了微码没解决.现在恢复出厂设置,明天去机房看看是否恢复.收起

还有微码也要考虑是否需要升级收起

回复 9# ynkmtlj


    我不知道激活码啊收起