17同行回答
By analyzing the last 4 characters (reason code) of word 11 ofthe SRC, we can narrow down the reason for the error:
If the reason code is B08E, then there was a mismatch or parity errorin the SMP cables identity on the system processors in the system.If the reason code is F23E, then there was a mismatch on the SMP cablesplugged into the system and the number of nodes detected in the system.If the reason code is FB53, then a system processor had an error thatmay have been caused by a bad SMP cable.Perform the following, regardless of the reason code:
Re-plug the SMP cables that connect to the system processors.Perform a slow boot.Does the problem persist? Yes: Continue with the next step.No: This ends the procedure.Replace the SMP cables.Perform a slow boot.Does the problem persist? No: This ends the procedure.Yes: Continue with the next step.Perform the following for each system processor:Power off the system (see Powering on and powering off).Remove one of the processors using symbolic FRU ANYPROC.Performa slow boot.Does the problem persist? Yes: Reinstall the processor you removed and thenrepeat this step, removing the next processor.No: Replace the processor you just removed, itis the failing item. This ends the procedure 建议清掉deconfig ，慢起，微码引起的可能性比较大。收起
