如题,使用BGPAPP01:/> lsvg -p rootvgrootvg:
PV_NAME PV STATE TOTAL PPs FREE PPs FREE DISTRIBUTION
hdisk0 active 546 0 00..00..00..00..00
hdisk1 active 546 163 59..00..00..00..104
hdisk2 active 546 265 47..00..00..109..109
hdisk2 missing 745 325 47..00..00..129..149
hdisk2 missing 745 265 00..00..00..116..149
很疑惑,为什么同一块pv,会有两种不同的状态显示。使用synclvodm rootvg命令显示:
0516-510 synclvodm: Physical volume not found for physical volume
identifier 000e7fedc52dd12c0000000000000000.
0516-510 synclvodm: Physical volume not found for physical volume
identifier 000e7fedc52e12a00000000000000000.
0516-548 synclvodm: Partially successful with updating volume
group rootvg.
0516-1281 synclvodm: Warning, lv control block of primalv
has been over written.
0516-1281 synclvodm: Warning, lv control block of paging00
has been over written.
0516-622 synclvodm: Warning, cannot write lv control block data.
0516-622 synclvodm: Warning, cannot write lv control block data.
0516-622 synclvodm: Warning, cannot write lv control block data.
哪位朋友碰到过这种情况?给点建议吧。
收起