V7000G2存储写耐力值限制问题？

不需要。
这是ssd特有的属性。
和磨损度差不多。

就是固态写入寿命快用完了，提前准备备机吧

以下是我在命令手册中看到的，这个应该就可以解答你的疑问了，标准什么的不重要，可以理解为临界或者预告警，着手准备 备件还是早做更换了，等完全坏了再换也可以，自己手动fail更换也可以，当然还是建议提前做更换的好。

Indicates the drive writes per day (DWPD). This value is blank for drives that are not SSD drives. The value must be a number 0 - 255.

This value indicates the percentage of life that is used by the drive. The value 0 indicates that full life remains, and 100 indicates that the drive is at or past its end of life.

Note: The drive must be replaced when the value exceeds 100.

This value is blank for drives that are either:

1. Not SSDs.
2. SSDs that predate support of the endurance indicator.
   This value also applies to drives that are yet to be polled, which can take up to 24 hours.

Indicates the DWPD usage rate. The values are:

• measuring
• high
• marginal
• low
  This value is blank for non-SSD drives.
  Note: This field displays a value only when the write_endurance_used value changes.

报错代码部分：
084050 / 010125  An array MDisk is expected to fail within six months due to limited write endurance of member drives    3060 / 1215

命令行 lsdrive x 输出部分

 write_endurance_used 30 
 drive_class_id 
 write_endurance_used 5