互联网服务pureScale安装部署
在虚拟机上搭建purescale出现问题。哪位大哥帮忙看看啊
使用脚本安装的，在1节点安装实例：
./db2icrt -d -cf suse1.mydb.com:suse1.mydb.com -m suse1.mydb.com:suse1.mydb.com -instance_shared_dir /db2fs/ -tbdev 192.168.1.1 -u db2psc db2psc
You need DB2 HA scripts to use SA MP with the DB2 HA feature.
These DB2 HA scripts are located at /usr/sbin/rsct/sapolicies/db2. The
DB2 installer detects whether these DB2 HA scripts need to be installed
or updated.
User response:
No action is required.
Installing or updating DB2 HA scripts for Tivoli SA MP :.......Success
Installing or updating DB2 Cluster Scripts for GPFS :.......Success
Setting default global profile registry variables :.......Success
Register NTP :.......Success
ERROR: The shared file system cluster option 'usePersistentReserve' has not been set to the optimal value of 'yes'. See the DB2 Information Center for more details.
There was an internal db2cluster error. Refer to the diagnostic logs (db2diag.log or /tmp/ibm.db2.cluster.*) and the DB2 Information Center for details.
A diagnostic log has been saved to '/tmp/ibm.db2.cluster.qxLGpY'.
ERROR: The existing GPFS cluster, "suse1.mydb.com", does not meet the
requirement for setting up a DB2 pureScale instance. Failed command:
"/db2/bin/db2cluster -cfs -verify -configuration". For more prerequisite
information, see the DB2 Information Center.
Verify User Managed File System :.......Failure
Post Install Recommendations
-----------------------------
Required steps:
There were some errors detected during DB2 installation. To collect the information files from the system, run the "db2support -install" command with the proper options before reporting the problem to IBM service. For information regarding the usage of the db2support tool, check the DB2 Information Center.
DB2 Setup log file finished at: Tue May 14 15:44:46 2013 EDT
============================================================
使用gpfs命令修改：
/usr/lpp/mmfs/bin/mmchconfig usePersistentReserve=yes
suse1:/db2/instance # /usr/lpp/mmfs/bin/mmchconfig usePersistentReserve=yes
Verifying GPFS is stopped on all nodes ...
mmchconfig: Processing disk gpfs1nsd
mmchconfig: Device sdb does not support PR_shared reserve policy.
mmchconfig: Unable to set reserve policy PR_shared on disk gpfs1nsd on node suse1.mydb.com.
mmchconfig: Unable to enable Persistent Reserve on the following disks:
gpfs1nsd
mmchconfig: The usePersistentReserve parameter will remain unchanged.
mmchconfig: Command failed. Examine previous error messages to determine cause.
suse1:/db2/instance #
suse1:/db2/instance #
suse1:/db2/instance #
共享存储时使用虚拟机管理的 我尝试了ISCSI的共享存储 也是修改不了
/mmchconfig usePersistentReserve=yes
安装方式参照：http://www.ibm.com/developerworks/cn/data/library/techarticle/dm-1207maoq/
哪位大侠 能帮忙回答下吗 卡这上面一直解决不了
./db2icrt -d -cf suse1.mydb.com:suse1.mydb.com -m suse1.mydb.com:suse1.mydb.com -instance_shared_dir /db2fs/ -tbdev 192.168.1.1 -u db2psc db2psc
You need DB2 HA scripts to use SA MP with the DB2 HA feature.
These DB2 HA scripts are located at /usr/sbin/rsct/sapolicies/db2. The
DB2 installer detects whether these DB2 HA scripts need to be installed
or updated.
User response:
No action is required.
Installing or updating DB2 HA scripts for Tivoli SA MP :.......Success
Installing or updating DB2 Cluster Scripts for GPFS :.......Success
Setting default global profile registry variables :.......Success
Register NTP :.......Success
ERROR: The shared file system cluster option 'usePersistentReserve' has not been set to the optimal value of 'yes'. See the DB2 Information Center for more details.
There was an internal db2cluster error. Refer to the diagnostic logs (db2diag.log or /tmp/ibm.db2.cluster.*) and the DB2 Information Center for details.
A diagnostic log has been saved to '/tmp/ibm.db2.cluster.qxLGpY'.
ERROR: The existing GPFS cluster, "suse1.mydb.com", does not meet the
requirement for setting up a DB2 pureScale instance. Failed command:
"/db2/bin/db2cluster -cfs -verify -configuration". For more prerequisite
information, see the DB2 Information Center.
Verify User Managed File System :.......Failure
Post Install Recommendations
-----------------------------
Required steps:
There were some errors detected during DB2 installation. To collect the information files from the system, run the "db2support -install" command with the proper options before reporting the problem to IBM service. For information regarding the usage of the db2support tool, check the DB2 Information Center.
DB2 Setup log file finished at: Tue May 14 15:44:46 2013 EDT
============================================================
使用gpfs命令修改：
/usr/lpp/mmfs/bin/mmchconfig usePersistentReserve=yes
suse1:/db2/instance # /usr/lpp/mmfs/bin/mmchconfig usePersistentReserve=yes
Verifying GPFS is stopped on all nodes ...
mmchconfig: Processing disk gpfs1nsd
mmchconfig: Device sdb does not support PR_shared reserve policy.
mmchconfig: Unable to set reserve policy PR_shared on disk gpfs1nsd on node suse1.mydb.com.
mmchconfig: Unable to enable Persistent Reserve on the following disks:
gpfs1nsd
mmchconfig: The usePersistentReserve parameter will remain unchanged.
mmchconfig: Command failed. Examine previous error messages to determine cause.
suse1:/db2/instance #
suse1:/db2/instance #
suse1:/db2/instance #
共享存储时使用虚拟机管理的 我尝试了ISCSI的共享存储 也是修改不了
/mmchconfig usePersistentReserve=yes
安装方式参照：http://www.ibm.com/developerworks/cn/data/library/techarticle/dm-1207maoq/
哪位大侠 能帮忙回答下吗 卡这上面一直解决不了
21同行回答
问题解决了么？我在V10.1 GA里安装的时候，也碰到这个问题The shared file system cluster option 'usePe ...stephensun123 发表于 2013-12-25 15:51
修改VMWARE的配置文件，实现虚拟磁盘共享应该是可以解决楼主的问题。...问题解决了么？
我在V10.1 GA里安装的时候，也碰到这个问题
The shared file system cluster option 'usePe ...
stephensun123 发表于 2013-12-25 15:51
修改VMWARE的配置文件，实现虚拟磁盘共享应该是可以解决楼主的问题。收起
浏览547
嗯 好的，找时间试下 谢谢共享 一直没有时间收起
浏览843
N4S pureScale cluster on VMware Workstation 10 on Windows 7, follows SAP naming convention
Windows 7 64 bit
VMware Workstation 10
SLES 11 SP1
DB2 10.1 GA
n4shost1:~ # lsscsi
[0:0:0:0] disk VMware, VMware Virtual S 1.0 /dev/sda
[1:0:0:0] disk VMware, VMware Virtual S 1.0 /dev/sdb
[1:0:1:0] disk VMware, VMware Virtual S 1.0 /dev/sdc
[1:0:2:0] disk VMware, VMware Virtual S 1.0 /dev/sdd
[1:0:3:0] disk VMware, VMware Virtual S 1.0 /dev/sde
[1:0:4:0] disk VMware, VMware Virtual S 1.0 /dev/sdf
[1:0:5:0] disk VMware, VMware Virtual S 1.0 /dev/sdg
[3:0:0:0] cd/dvd NECVMWar VMware SATA CD01 1.00 /dev/sr0
n4shost1:~ # /opt/IBM/dsf101/bin/db2cluster -cfs -list -filesystem
FILE SYSTEM NAME MOUNT_POINT
--------------------------------- -------------------------
db2data /db2/N4S/sapdata
db2dbdir /db2/N4S/db2n4s
db2dump /db2/N4S/db2dump
db2fs1 /db2/instance_shared
db2log /db2/N4S/log_dir
n4shost1:~ # /opt/IBM/dsf101/bin/db2cluster -cfs -list -domain
Domain Name: db2cluster_20131225114148.pvgl.sap.corp
n4shost1:~ # df -k
Filesystem 1K-blocks Used Available Use% Mounted on
/dev/sda2 25806300 10636428 13858968 44% /
devtmpfs 8388608 128 8388480 1% /dev
tmpfs 1472412 0 1472412 0% /dev/shm
/dev/db2fs1 4194304 617472 3576832 15% /db2/instance_shared
/dev/db2data 31457280 628736 30828544 2% /db2/N4S/sapdata
/dev/db2log 10485760 627712 9858048 6% /db2/N4S/log_dir
/dev/db2dump 5242880 609280 4633600 12% /db2/N4S/db2dump
/dev/db2dbdir 2097152 574464 1522688 28% /db2/N4S/db2n4s
n4shost2 /db2/db2n4s> db2start
12/25/2013 13:57:00 0 0 SQL1063N DB2START processing was successful.
12/25/2013 13:57:00 1 0 SQL1063N DB2START processing was successful.
SQL1063N DB2START processing was successful.
n4shost2 /db2/db2n4s> db2instance -list
ID TYPE STATE HOME_HOST CURRENT_HOST ALERT PARTITION_NUMBER LOGICAL_PORT NETNAME
-- ---- ----- --------- ------------ ----- ---------------- ------------ -------
0 MEMBER STARTED n4shost2 n4shost2 NO 0 0 n4shost2-nn
1 MEMBER STARTED n4shost3 n4shost3 NO 0 0 n4shost3-nn
128 CF PRIMARY n4shost1 n4shost1 NO - 0 n4shost1-nn
HOSTNAME STATE INSTANCE_STOPPED ALERT
-------- ----- ---------------- -----
n4shost1 ACTIVE NO NO
n4shost3 ACTIVE NO NO
n4shost2 ACTIVE NO NO收起
Windows 7 64 bit
VMware Workstation 10
SLES 11 SP1
DB2 10.1 GA
n4shost1:~ # lsscsi
[0:0:0:0] disk VMware, VMware Virtual S 1.0 /dev/sda
[1:0:0:0] disk VMware, VMware Virtual S 1.0 /dev/sdb
[1:0:1:0] disk VMware, VMware Virtual S 1.0 /dev/sdc
[1:0:2:0] disk VMware, VMware Virtual S 1.0 /dev/sdd
[1:0:3:0] disk VMware, VMware Virtual S 1.0 /dev/sde
[1:0:4:0] disk VMware, VMware Virtual S 1.0 /dev/sdf
[1:0:5:0] disk VMware, VMware Virtual S 1.0 /dev/sdg
[3:0:0:0] cd/dvd NECVMWar VMware SATA CD01 1.00 /dev/sr0
n4shost1:~ # /opt/IBM/dsf101/bin/db2cluster -cfs -list -filesystem
FILE SYSTEM NAME MOUNT_POINT
--------------------------------- -------------------------
db2data /db2/N4S/sapdata
db2dbdir /db2/N4S/db2n4s
db2dump /db2/N4S/db2dump
db2fs1 /db2/instance_shared
db2log /db2/N4S/log_dir
n4shost1:~ # /opt/IBM/dsf101/bin/db2cluster -cfs -list -domain
Domain Name: db2cluster_20131225114148.pvgl.sap.corp
n4shost1:~ # df -k
Filesystem 1K-blocks Used Available Use% Mounted on
/dev/sda2 25806300 10636428 13858968 44% /
devtmpfs 8388608 128 8388480 1% /dev
tmpfs 1472412 0 1472412 0% /dev/shm
/dev/db2fs1 4194304 617472 3576832 15% /db2/instance_shared
/dev/db2data 31457280 628736 30828544 2% /db2/N4S/sapdata
/dev/db2log 10485760 627712 9858048 6% /db2/N4S/log_dir
/dev/db2dump 5242880 609280 4633600 12% /db2/N4S/db2dump
/dev/db2dbdir 2097152 574464 1522688 28% /db2/N4S/db2n4s
n4shost2 /db2/db2n4s> db2start
12/25/2013 13:57:00 0 0 SQL1063N DB2START processing was successful.
12/25/2013 13:57:00 1 0 SQL1063N DB2START processing was successful.
SQL1063N DB2START processing was successful.
n4shost2 /db2/db2n4s> db2instance -list
ID TYPE STATE HOME_HOST CURRENT_HOST ALERT PARTITION_NUMBER LOGICAL_PORT NETNAME
-- ---- ----- --------- ------------ ----- ---------------- ------------ -------
0 MEMBER STARTED n4shost2 n4shost2 NO 0 0 n4shost2-nn
1 MEMBER STARTED n4shost3 n4shost3 NO 0 0 n4shost3-nn
128 CF PRIMARY n4shost1 n4shost1 NO - 0 n4shost1-nn
HOSTNAME STATE INSTANCE_STOPPED ALERT
-------- ----- ---------------- -----
n4shost1 ACTIVE NO NO
n4shost3 ACTIVE NO NO
n4shost2 ACTIVE NO NO收起
浏览1028
问题解决了么？
我在V10.1 GA里安装的时候，也碰到这个问题
The shared file system cluster option 'usePersistentReserve' has not been set to the optimal value of 'yes'. See the DB2 Information Center for more details
DB2安装的时候，使用了db2_install的命令。但注意到了这个命令已经deprecated
DBI1324W Support of the db2_install command is deprecated. For more information, see the DB2 Information Center.
改用db2setup，并在安装的时候，创建instance，之后instance创建成功。
另外，我不是使用ISCSI 共享存储，而是直接使用VMware的虚拟磁盘，进行共享，在VMware的VMX文件中，包含如下参数
disk.locking = "FALSE"
diskLib.dataCacheMaxSize = "0"
scsix.sharedBus = "virtual"
scsix:x.shared = "TRUE"
scsix:x.mode = "independent-persistent"
在VMware Workstation 10，和VMware ESX 4.1中，均成功创建三个节点的pureScale cluster。在VWare Workstation 10是直接安装的DB2 10.1 GA，在ESX 4.1上的cluster是先装V9.7，然后转换到V9.8，最后升级到10.1 GA的。在从V9.8升级到10.1的时候，db2iupgrade同样报了usePersistentReserve的问题，后使用db2iupgrade_local 在每个节点上单独进行升级。从V9.8升级到10.1后，需要注意/var/ct/cfg/netmon.cf的配置。
Good luck收起
我在V10.1 GA里安装的时候，也碰到这个问题
The shared file system cluster option 'usePersistentReserve' has not been set to the optimal value of 'yes'. See the DB2 Information Center for more details
DB2安装的时候，使用了db2_install的命令。但注意到了这个命令已经deprecated
DBI1324W Support of the db2_install command is deprecated. For more information, see the DB2 Information Center.
改用db2setup，并在安装的时候，创建instance，之后instance创建成功。
另外，我不是使用ISCSI 共享存储，而是直接使用VMware的虚拟磁盘，进行共享，在VMware的VMX文件中，包含如下参数
disk.locking = "FALSE"
diskLib.dataCacheMaxSize = "0"
scsix.sharedBus = "virtual"
scsix:x.shared = "TRUE"
scsix:x.mode = "independent-persistent"
在VMware Workstation 10，和VMware ESX 4.1中，均成功创建三个节点的pureScale cluster。在VWare Workstation 10是直接安装的DB2 10.1 GA，在ESX 4.1上的cluster是先装V9.7，然后转换到V9.8，最后升级到10.1 GA的。在从V9.8升级到10.1的时候，db2iupgrade同样报了usePersistentReserve的问题，后使用db2iupgrade_local 在每个节点上单独进行升级。从V9.8升级到10.1后，需要注意/var/ct/cfg/netmon.cf的配置。
Good luck收起
浏览1082
找到原因了，目前有个想法可以解决这个 正在测试中。周末看能不能过去收起
浏览819
看到老外 用笔记本think pad W520做写的文档是成功的，http://www.zinox.com/node/156 大家可以看看收起
浏览768
suse1:/db2/bin # ./db2cluster -cfs -verify -configuration
The shared file system cluster option 'usePersistentReserve' has not been set to the optimal value of 'yes'. See the DB2 Information Center for more details.
There was an internal db2cluster error. Refer to the diagnostic logs (db2diag.log or /tmp/ibm.db2.cluster.*) and the DB2 Information Center for details.
A diagnostic log has been saved to '/tmp/ibm.db2.cluster.95QCRG'.
suse1:/db2/bin #收起
The shared file system cluster option 'usePersistentReserve' has not been set to the optimal value of 'yes'. See the DB2 Information Center for more details.
There was an internal db2cluster error. Refer to the diagnostic logs (db2diag.log or /tmp/ibm.db2.cluster.*) and the DB2 Information Center for details.
A diagnostic log has been saved to '/tmp/ibm.db2.cluster.95QCRG'.
suse1:/db2/bin #收起
浏览816
不会是没戏吧，PC机虚拟机就没法搭建起来啊收起
浏览817
哪位大哥有自己的电脑成功安装purescale 的经验啊收起
浏览824