PowerVC捕获镜像问题
PowerVC捕获镜像只能在LPAR关闭状态进行，为什么？
通过HMC手动创建的LPAR，是需要运行cloud-init后才可被PowerVC管理，对LPAR中的磁盘及网络使用方式是否有要求？
4同行回答
Capture是需要很多的要求的，具体参照：
Note: To prepare the VM and to verify that all of the capture requirements are met, see the
“Capture requirements” section in the IBM Knowledge Center, found at:
收起浏览1905
- NOTE: VSAE is deprecated as of PowerVC 1.2.3 . The PowerVC 1.3.0 Knowledge Center contains this statement: "VSAE is deprecated and will be withdrawn from support in the next release. It is strongly recommended that new images are constructed with cloud-init. Cloud-init is the strategic image activation technology of IBM. It offers a rich set of system initialization features and a high degree of interoperability."
- ctivation-engine或者cloud-init的功能是否类似于vmtools，可否给大家讲解一下？
- activation-engine方式不用关机。cloud-init方式需要关机，岂不是倒退了？
- 我的理解应该是和vmtools很像。它做的事如下：配置ip、配置主机名，同时还可以调整像hcheck_interval、hcheck_mode等定制化的参数。
- 我理解采用cloud-init应该是和现在x86下的很多IaaS解决方案相同吧。
- 谢谢崔老师！
- 客气，我这一块也不是太熟悉，一起研究研究
- 其实如果没有vmtools，vmware也是很多事是没法干的~
捕捉镜像是要关机的，通过activation-engine或者cloud-init激活。要求就是虚拟机上所有的网络和存储都必须是通过VIOS供给的。
收起浏览1715