重做radio后，重新安装CRS安装失败的问题
因为磁盘阵列被重做了，所以必须重新安装oracle RAC，删除失效的卷组，并重新按照重做raid之前的裸设备重建后重新安装CRS，之前的步骤一切都正常，但当执行root.sh时出错了在网上查过之后，说是删除每台机器上的/etc/oracle/scls_scr/rac1/oracle/cssfatal 文件即可http://blog.csdn...显示全部
查看其它 10 个回答myguangzhou的回答
Applies to:
Oracle Server - Enterprise Edition - Version: 10.1.0.2 to 11.1.0.8 - Release: 10.1 to 11.1
Generic UNIX
Purpose
The purpose of this document is to help DBA's and support analysts understand how
to clean up a failed CRS (Cluster Ready Services) install for 10g and 11.1 RAC.
For 11.2, see Note: 942166.1 How to Proceed from Failed 11gR2 Grid Infrastructure (CRS) Installation
Scope and Application
DBA's and Support Analysts
How to Clean Up After a Failed 10g or 11.1 Oracle Clusterware Installation
10g and 11.1 RAC: How to Clean Up After a Failed CRS Install------------------------------------------------------------Not cleaning up a failed CRS install can cause problems like node reboots.Follow these steps to clean up a failed CRS install:1. Run the rootdelete.sh script then the rootdeinstall.sh script from the $ORA_CRS_HOME/install directory on any nodes you are removing CRS from. Running these scripts should be sufficent to clean up your CRS install. Rootdelete.sh accepts options like nosharedvar/sharedvar, and nosharedhome/sharedhome. Makeyourself familiar with these options by reading the Oracle Clusterware and Oracle Real Application Clusters Administration and Deployment Guide.If you have any problems with these scripts please open a service request. If for some reason you have to manually remove the install due to problemswith the scripts, continue to step 2: 2. Stop the Nodeapps on all nodes:
srvctl stop nodeapps -n
3. Prevent CRS from starting when the node boots. To do this issue the following
as root:
Sun:
rm /etc/init.d/init.cssd
rm /etc/init.d/init.crs
rm /etc/init.d/init.crsd
rm /etc/init.d/init.evmd
rm /etc/rc3.d/K96init.crs
rm /etc/rc3.d/S96init.crs
rm -Rf /var/opt/oracle/scls_scr
rm -Rf /var/opt/oracle/oprocd
rm /etc/inittab.crs
cp /etc/inittab.orig /etc/inittab
Linux:
rm /etc/oracle/*
rm -f /etc/init.d/init.cssd
rm -f /etc/init.d/init.crs
rm -f /etc/init.d/init.crsd
rm -f /etc/init.d/init.evmd
rm -f /etc/rc2.d/K96init.crs
rm -f /etc/rc2.d/S96init.crs
rm -f /etc/rc3.d/K96init.crs
rm -f /etc/rc3.d/S96init.crs
rm -f /etc/rc5.d/K96init.crs
rm -f /etc/rc5.d/S96init.crs
rm -Rf /etc/oracle/scls_scr
rm -f /etc/inittab.crs
cp /etc/inittab.orig /etc/inittab
HP-UX:
rm /sbin/init.d/init.cssd
rm /sbin/init.d/init.crs
rm /sbin/init.d/init.crsd
rm /sbin/init.d/init.evmd
rm /sbin/rc2.d/K960init.crs
rm /sbin/rc2.d/K001init.crs
rm /sbin/rc3.d/K960init.crs
rm /sbin/rc3.d/S960init.crs
rm -Rf /var/opt/oracle/scls_scr
rm -Rf /var/opt/oracle/oprocd
rm /etc/inittab.crs
cp /etc/inittab.orig /etc/inittab
HP Tru64:
rm /sbin/init.d/init.cssd
rm /sbin/init.d/init.crs
rm /sbin/init.d/init.crsd
rm /sbin/init.d/init.evmd
rm /sbin/rc3.d/K96init.crs
rm /sbin/rc3.d/S96init.crs
rm -Rf /var/opt/oracle/scls_scr
rm -Rf /var/opt/oracle/oprocd
rm /etc/inittab.crs
cp /etc/inittab.orig /etc/inittab
IBM AIX:
rm /etc/init.cssd
rm /etc/init.crs
rm /etc/init.crsd
rm /etc/init.evmd
rm /etc/rc.d/rc2.d/K96init.crs
rm /etc/rc.d/rc2.d/S96init.crs
rm -Rf /etc/oracle/scls_scr
rm -Rf /etc/oracle/oprocd
rm /etc/inittab.crs
cp /etc/inittab.orig /etc/inittab
4. If they are not already down, kill off EVM, CRS, and CSS processes or reboot
the node:
ps -ef | grep crs
kill
ps -ef | grep evm
kill
ps -ef | grep css
kill
Do not kill any OS processes, for example icssvr_daemon process !
5. If there is no other Oracle software running (like listeners, DB's, etc...),
you can remove the files in /var/tmp/.oracle or /tmp/.oracle. Example:
rm -f /var/tmp/.oracle/*
or
rm -f /tmp/.oracle/*
6. Remove the ocr.loc
Usually the ocr.loc can be found at /etc/oracle
7. De-install the CRS home in the Oracle Universal Installer
8. Remove the CRS install location.
9. Clean out the OCR and Voting Files with dd commands. Example: dd if=/dev/zero of=/dev/rdsk/V1064_vote_01_20m.dbf bs=1M count=256 dd if=/dev/zero of=/dev/rdsk/ocrV1064_100m.ora bs=1M count=256 See the Clusterware Installation Guide for sizing requirements... If you placed the OCR and voting disk on a shared filesystem, remove them. If you are removing the RDBMS installation, also clean out any ASM disks if they have already been used.10. The /tmp/CVU* dir should be cleaned also to avoid the cluvfy misreporting.11. It is good practice to reboot the node before starting the next install.12.If you would like to re-install CRS, follow the steps in the RAC Installation manual.
Oracle Server - Enterprise Edition - Version: 10.1.0.2 to 11.1.0.8 - Release: 10.1 to 11.1
Generic UNIX
Purpose
The purpose of this document is to help DBA's and support analysts understand how
to clean up a failed CRS (Cluster Ready Services) install for 10g and 11.1 RAC.
For 11.2, see Note: 942166.1 How to Proceed from Failed 11gR2 Grid Infrastructure (CRS) Installation
Scope and Application
DBA's and Support Analysts
How to Clean Up After a Failed 10g or 11.1 Oracle Clusterware Installation
10g and 11.1 RAC: How to Clean Up After a Failed CRS Install------------------------------------------------------------Not cleaning up a failed CRS install can cause problems like node reboots.Follow these steps to clean up a failed CRS install:1. Run the rootdelete.sh script then the rootdeinstall.sh script from the $ORA_CRS_HOME/install directory on any nodes you are removing CRS from. Running these scripts should be sufficent to clean up your CRS install. Rootdelete.sh accepts options like nosharedvar/sharedvar, and nosharedhome/sharedhome. Makeyourself familiar with these options by reading the Oracle Clusterware and Oracle Real Application Clusters Administration and Deployment Guide.If you have any problems with these scripts please open a service request. If for some reason you have to manually remove the install due to problemswith the scripts, continue to step 2: 2. Stop the Nodeapps on all nodes:
srvctl stop nodeapps -n
3. Prevent CRS from starting when the node boots. To do this issue the following
as root:
Sun:
rm /etc/init.d/init.cssd
rm /etc/init.d/init.crs
rm /etc/init.d/init.crsd
rm /etc/init.d/init.evmd
rm /etc/rc3.d/K96init.crs
rm /etc/rc3.d/S96init.crs
rm -Rf /var/opt/oracle/scls_scr
rm -Rf /var/opt/oracle/oprocd
rm /etc/inittab.crs
cp /etc/inittab.orig /etc/inittab
Linux:
rm /etc/oracle/*
rm -f /etc/init.d/init.cssd
rm -f /etc/init.d/init.crs
rm -f /etc/init.d/init.crsd
rm -f /etc/init.d/init.evmd
rm -f /etc/rc2.d/K96init.crs
rm -f /etc/rc2.d/S96init.crs
rm -f /etc/rc3.d/K96init.crs
rm -f /etc/rc3.d/S96init.crs
rm -f /etc/rc5.d/K96init.crs
rm -f /etc/rc5.d/S96init.crs
rm -Rf /etc/oracle/scls_scr
rm -f /etc/inittab.crs
cp /etc/inittab.orig /etc/inittab
HP-UX:
rm /sbin/init.d/init.cssd
rm /sbin/init.d/init.crs
rm /sbin/init.d/init.crsd
rm /sbin/init.d/init.evmd
rm /sbin/rc2.d/K960init.crs
rm /sbin/rc2.d/K001init.crs
rm /sbin/rc3.d/K960init.crs
rm /sbin/rc3.d/S960init.crs
rm -Rf /var/opt/oracle/scls_scr
rm -Rf /var/opt/oracle/oprocd
rm /etc/inittab.crs
cp /etc/inittab.orig /etc/inittab
HP Tru64:
rm /sbin/init.d/init.cssd
rm /sbin/init.d/init.crs
rm /sbin/init.d/init.crsd
rm /sbin/init.d/init.evmd
rm /sbin/rc3.d/K96init.crs
rm /sbin/rc3.d/S96init.crs
rm -Rf /var/opt/oracle/scls_scr
rm -Rf /var/opt/oracle/oprocd
rm /etc/inittab.crs
cp /etc/inittab.orig /etc/inittab
IBM AIX:
rm /etc/init.cssd
rm /etc/init.crs
rm /etc/init.crsd
rm /etc/init.evmd
rm /etc/rc.d/rc2.d/K96init.crs
rm /etc/rc.d/rc2.d/S96init.crs
rm -Rf /etc/oracle/scls_scr
rm -Rf /etc/oracle/oprocd
rm /etc/inittab.crs
cp /etc/inittab.orig /etc/inittab
4. If they are not already down, kill off EVM, CRS, and CSS processes or reboot
the node:
ps -ef | grep crs
kill
ps -ef | grep evm
kill
ps -ef | grep css
kill
Do not kill any OS processes, for example icssvr_daemon process !
5. If there is no other Oracle software running (like listeners, DB's, etc...),
you can remove the files in /var/tmp/.oracle or /tmp/.oracle. Example:
rm -f /var/tmp/.oracle/*
or
rm -f /tmp/.oracle/*
6. Remove the ocr.loc
Usually the ocr.loc can be found at /etc/oracle
7. De-install the CRS home in the Oracle Universal Installer
8. Remove the CRS install location.
9. Clean out the OCR and Voting Files with dd commands. Example: dd if=/dev/zero of=/dev/rdsk/V1064_vote_01_20m.dbf bs=1M count=256 dd if=/dev/zero of=/dev/rdsk/ocrV1064_100m.ora bs=1M count=256 See the Clusterware Installation Guide for sizing requirements... If you placed the OCR and voting disk on a shared filesystem, remove them. If you are removing the RDBMS installation, also clean out any ASM disks if they have already been used.10. The /tmp/CVU* dir should be cleaned also to avoid the cluvfy misreporting.11. It is good practice to reboot the node before starting the next install.12.If you would like to re-install CRS, follow the steps in the RAC Installation manual.
浏览2264