P6 550内存报错

B123E504

Explanation: There was a failure most likely attributable to a memory DIMM (or DIMMs), but it could also be software-related or require further support. Impact: Availability Severity: SPE System firmware changes that affect all systems HIPER/Non-Pervasive: DEFERRED: A problem was fixed that caused a system crash with SRC B170E540. HIPER/Non-Pervasive: A related problem was also fixed that could cause a live lock on the power bus resulting in a system crash. DEFERRED: A problem was fixed that caused an uncorrectable error (SRC B123E504) to be erroneously logged when 64GB DIMMs were installed in a system that already had 16GB or 32GB DIMMs. To address poor placement of partitions following a reboot of a server with unlicensed cores, the firmware was enhanced to run the affinity manager when the initialize configuration operation is done from the HMC. A problem was also fixed that caused the hypervisor to be left in an inconsistent state after a partition create operation failed. Concurrent hot add/repair maintenance firmware fixes A problem was fixed that caused a CHARM operation to fail after this sequence of events: 1. User-initiated platform system dump is requested (from ASMI or HMC). 2. Service processor reset/reload takes place while dump collection is in progress. 3. User attempts a CHARM operation.