[求助]双连接存储后，Win2003服务器无法正常启动
经常遇到此问题：环境：IBM DS4700存储、IBM X系列服务器、各服务器安装2块HBA卡（Qlogic），交叉连接2台IBM光纤交换机、服务器端已安装RDAC现象：配置存储后，服务器端可以看到本地及存储中的磁盘，但过一段时间以后，如果HBA卡连着光纤，Windows 2003启动到出现LOGO后，下面的滚动条就会一直...显示全部
查看其它 9 个回答shuai_beijing的回答
在BIOS里面把 HBA卡设备启动给关了，另外再设置一下BIOS
Power on or restart the system and press F1 when prompted to enter Setup.
1. Select System Settings and press Enter.
2. Select Devices and I/O Ports and press Enter.
3. Select Enable/Disable Legacy Option ROMs and press Enter.
4. Under Enable/Disable Legacy Option ROMs select the slot number in which the HBA is installed and press Enter.
5. Select Disabled and press Enter.
6. Under Enable/Disable UEFI Option ROMs select the slot number in which the HBA is installed and press Enter.
7. Select Disabled and press Enter.
8. Press Esc 3 times to return to the System Configuration main menu, select Save Settings and press Enter.
9. Select Boot Manager and press Enter.
10. Select Add Boot Option and press Enter.
11. Select Legacy Only and press Enter.
12. Press Esc to return to Boot Manager.
13. Select Change Boot Order and press Enter.
14. Select the existing Boot Order and press Enter.
15. Select Legacy Only and press the + key to promote it to a position above the local device which contains the operating system . Typically, this would be above Hard Disk 0. Press Enter.
16. Select Commit Changes and press Enter.
17. Press Esc to return to Boot Manager.
18. Select Reset System and press Enter.
Power on or restart the system and press F1 when prompted to enter Setup.
1. Select System Settings and press Enter.
2. Select Devices and I/O Ports and press Enter.
3. Select Enable/Disable Legacy Option ROMs and press Enter.
4. Under Enable/Disable Legacy Option ROMs select the slot number in which the HBA is installed and press Enter.
5. Select Disabled and press Enter.
6. Under Enable/Disable UEFI Option ROMs select the slot number in which the HBA is installed and press Enter.
7. Select Disabled and press Enter.
8. Press Esc 3 times to return to the System Configuration main menu, select Save Settings and press Enter.
9. Select Boot Manager and press Enter.
10. Select Add Boot Option and press Enter.
11. Select Legacy Only and press Enter.
12. Press Esc to return to Boot Manager.
13. Select Change Boot Order and press Enter.
14. Select the existing Boot Order and press Enter.
15. Select Legacy Only and press the + key to promote it to a position above the local device which contains the operating system . Typically, this would be above Hard Disk 0. Press Enter.
16. Select Commit Changes and press Enter.
17. Press Esc to return to Boot Manager.
18. Select Reset System and press Enter.
浏览1321