bladecenterE报警问题
以下是问题截图
5ESERVPROC02/02/13 04:25:580x00022004Primary MM local management bus failed.6ESERVPROC02/02/13 04:25:500x00020000Failure reading device on system management bus 0.收起
5ESERVPROC02/02/13 04:25:580x00022004Primary MM local management bus failed.6ESERVPROC02/02/13 04:25:500x00020000Failure reading device on system management bus 0.收起
查看其它 2 个回答linyj的回答
回复 2# lhn045
顶一个
Perform these steps:
1、Restart the advanced management module.
2、Flash (update if applicable) the firmware for the advanced management module and restart the advanced management module.
3、Fail over to the standby advanced management module if available. Then reseat the advanced management module that had the error. Fail back to see if error persists. If a standby advanced management module is not present, reseat the advanced management module.
4、Replace the failed advanced management module.
顶一个
Perform these steps:
1、Restart the advanced management module.
2、Flash (update if applicable) the firmware for the advanced management module and restart the advanced management module.
3、Fail over to the standby advanced management module if available. Then reseat the advanced management module that had the error. Fail back to see if error persists. If a standby advanced management module is not present, reseat the advanced management module.
4、Replace the failed advanced management module.
浏览2711