ds4800+exp810 两条链路都断了，lun都不可以用

没有现场了，看不到现象靠猜可能性就多了。也许仅仅按正确顺序重启盘阵就都认了。收起

都是1年前的事了，现在想学怎恢复收起

Revive Array


This command forces the specified array and its associated failed disk drives to the Optimal state.


Attention: Possible loss of data access– Correct use of this command depends on the data configuration
on all of the disk drives in the array. Never try to revive a disk drive unless you are supervised
by a Customer and Technical Support representative.


Syntax
revive array [arrayNumber]


另外，建议你把ASD日志发出来！收起

谁有串口操作恢复 lun文档收起

回复 3# manganese_zh


    存储都显示lun为叉叉，坏掉了，主机更不能访问到lun收起

楼主把情况描述的越清楚，越容易定位问题哦！收起

lun都不可用，是说在存储层面看到不可用，还是主机层面看到不可用。
lun的状态，能否截图过来。收起