[root@node2:/usr/es/sbin/cluster/etc]# oslevel -s
6100-09-03-1415
[root@node2:/usr/es/sbin/cluster/etc]# tail -20 /etc/hosts
# indicates the beginning of a comment; characters up to the end of the
# line are not interpreted by routines which search this file. Blank
# lines are allowed.
# Internet Address Hostname # Comments
# 192.9.200.1 net0sample # ethernet name/address
# 128.100.0.1 token0sample # token ring name/address
# 10.2.0.2 x25sample # x.25 name/address
# 2000:1:1:1:209:6bff:feee:2b7f ipv6sample # ipv6 name/address
#127.0.0.1 loopback localhost # loopback (lo0) name/address
192.168.8.8 node1
192.168.8.45 node2
172.16.3.100 node1-per
172.16.3.200 node2-per
172.16.3.10 node1-ser
172.16.3.20 node2-ser
[root@node2:/usr/es/sbin/cluster/etc]# ifconfig -a
en0: flags=1e080863,c0
inet 192.168.8.45 netmask 0xffffff00 broadcast 192.168.8.255
tcp_sendspace 131072 tcp_recvspace 65536 rfc1323 0
en1: flags=1e080863,c0
inet 172.16.3.200 netmask 0xffffff00 broadcast 172.16.3.255
tcp_sendspace 131072 tcp_recvspace 65536 rfc1323 0
lo0: flags=e08084b,c0
inet 127.0.0.1 netmask 0xff000000 broadcast 127.255.255.255
inet6 ::1%1/0
tcp_sendspace 131072 tcp_recvspace 131072 rfc1323 1
[root@node2:/usr/es/sbin/cluster/etc]#
[root@node1:/usr/es/sbin/cluster/etc]# cltopinfo
Cluster Name: my_cluster
Cluster Connection Authentication Mode: Standard
Cluster Message Authentication Mode: None
Cluster Message Encryption: None
Use Persistent Labels for Communication: No
Repository Disk: hdisk3
Cluster IP Address:
There are 2 node(s) and 1 network(s) defined
NODE node1:
Network net_ether_01
node2-ser 172.16.3.20
node1-ser 172.16.3.10
node1 192.168.8.8
NODE node2:
Network net_ether_01
node2-ser 172.16.3.20
node1-ser 172.16.3.10
node2 192.168.8.45
Resource Group rg01
Startup Policy Online On Home Node Only
Fallover Policy Fallover To Next Priority Node In The List
Fallback Policy Never Fallback
Participating Nodes node1 node2
Service IP Label node1-ser
Resource Group rg02
Startup Policy Online On Home Node Only
Fallover Policy Fallover To Next Priority Node In The List
Fallback Policy Fallback To Higher Priority Node In The List
Participating Nodes node2 node1
Service IP Label node2-ser
[root@node1:/usr/es/sbin/cluster/etc]#
[root@node1:/usr/es/sbin/cluster/etc]# clmgr sync cluster
Saving existing /var/hacmp/clverify/ver_mping/ver_mping.log to /var/hacmp/clverify/ver_mping/ver_mping.log.bak
Verifying clcomd communication, please be patient.
Verifying multicast communication with mping.
/usr/sbin/mping version 1.1
Connecting using IPv4.
Listening on 228.168.101.43/4098:
Replying to mping from 192.168.8.8 bytes=32 seqno=0 ttl=1
Replying to mping from 192.168.8.8 bytes=32 seqno=1 ttl=1
Replying to mping from 192.168.8.8 bytes=32 seqno=2 ttl=1
Replying to mping from 192.168.8.8 bytes=32 seqno=3 ttl=1
Replying to mping from 192.168.8.8 bytes=32 seqno=4 ttl=1
Committing any changes, as required, to all available nodes...
Adding any necessary PowerHA SystemMirror entries to /etc/inittab and /etc/rc.net for IPAT on node node1.
cldare: Configuring a 2 node cluster in AIX may take up to 2 minutes, Please wait.
Verification to be performed on the following:
Cluster Topology
Cluster Resources
Retrieving data from available cluster nodes. This could take a few minutes.
Start data collection on node node1
Start data collection on node node2
Collector on node node2 completed
Collector on node node1 completed
Data collection complete
Verifying Cluster Topology...
Completed 10 percent of the verification checks
WARNING: Multiple communication interfaces are recommended for networks that
use IP aliasing in order to prevent the communication interface from
becoming a single point of failure. There are fewer than the recommended
number of communication interfaces defined on the following node(s) for
the given network(s):
Node: Network:
---------------------------------- ----------------------------------
node1 net_ether_01
node2 net_ether_01
Completed 20 percent of the verification checks
Completed 30 percent of the verification checks
Verifying Cluster Resources...
Completed 40 percent of the verification checks
WARNING: Application monitors are required for detecting application failures
in order for PowerHA SystemMirror to recover from them. Application monitors are started
by PowerHA SystemMirror when the resource group in which they participate is activated.
The following application(s), shown with their associated resource group,
do not have an application monitor configured:
Application Server Resource Group
-------------------------------- ---------------------------------
appActrl rg01
appBctrl rg02
Completed 50 percent of the verification checks
Completed 60 percent of the verification checks
Completed 70 percent of the verification checks
Completed 80 percent of the verification checks
Completed 90 percent of the verification checks
Completed 100 percent of the verification checks
Remember to redo automatic error notification if configuration has changed.
Verification has completed normally.
Timer object autoclverify already exists
ERROR: Creating the cluster in AIX failed. Check output for errors in local cluster configuration, correct them, and try synchronization again.
ERROR: Updating the cluster in AIX failed. Check output for errors in local cluster configuration, correct them, and try synchronization again.
cldare: Error detected during synchronization.
[root@node2:/usr/es/sbin/cluster/etc]# lssrc -a
Subsystem Group PID Status
portmap portmap 4456584 active
dpid2 tcpip 4587660 active
hostmibd tcpip 4653198 active
inetd tcpip 4718736 active
aixmibd tcpip 4784274 active
sendmail mail 3997870 active
syslogd ras 2556044 active
aso 4849814 active
platform_agent 2687010 active
biod nfs 5374116 active
cimsys 5177514 active
snmpd tcpip 6029500 active
rpc.lockd nfs 5636272 active
qdaemon spooler 6160586 active
writesrv spooler 6488262 active
pconsole system 6291690 active
cas_agent 6095052 active
clstrmgrES cluster 6553822 active
clconfd caa 4391116 active
clcomd caa 11534448 active
lpd spooler inoperative
还需要哪些信息?我后续贴出来收起