各位大神好，
环境：IBM 570双机，接一台DS4300存储，现一台570坏了一张HBA卡，更换后发现状态异常，rmdev -Rl fcs0 删除后重新识别，还是如此，存储只有一个默认组，新换上的HBA卡WWN卡已经添加到这个组中。
主机和存储部分输出和截图如下：
[icdnode2][/]#lsdev -C |grep dar
dar0 Available 1722-600 (600) Disk Array Router
en0 Available 05-08 Standard Ethernet Network Interface
en1 Available 05-09 Standard Ethernet Network Interface
en2 Available 09-08 Standard Ethernet Network Interface
en3 Defined 09-09 Standard Ethernet Network Interface
en4 Defined 0K-08 Standard Ethernet Network Interface
en5 Defined 0K-09 Standard Ethernet Network Interface
[icdnode2][/]#lsdev |grep dac
dac0 Defined 06-08-02 1722-600 (600) Disk Array Controller
dac1 Available 0E-08-02 1722-600 (600) Disk Array Controller
[icdnode2][/]#lsdev -Cc adapter
fcs0 Available 06-08 FC Adapter
fcs1 Available 0E-08 FC Adapter
ide0 Available 0C-08 ATA/IDE Controller Device
ide1 Available 0Q-08 ATA/IDE Controller Device
lai0 Available 08-00 GXT135P Graphics Adapter
sa0 Available 0D-08 IBM 8-Port EIA-232/RS-422A (PCI) Adapter
sisscsia0 Available 03-08 PCI-X Ultra320 SCSI Adapter
sisscsia1 Available 0A-08 PCI-X Dual Channel Ultra320 SCSI Adapter
sisscsia2 Available 0B-08 PCI-X Ultra320 SCSI Adapter
sisscsia3 Available 0I-08 PCI-X Ultra320 SCSI Adapter
sisscsia4 Available 0P-08 PCI-X Ultra320 SCSI Adapter
usbhc0 Available 04-08 USB Host Controller (33103500)
usbhc1 Available 04-09 USB Host Controller (33103500)
usbhc2 Available 0J-08 USB Host Controller (33103500)
usbhc3 Available 0J-09 USB Host Controller (33103500)
vsa0 Available LPAR Virtual Serial Adapter
vsa1 Available LPAR Virtual Serial Adapter
[icdnode2][/]#
[icdnode2][/]#fget_config -Av
---dar0---
User array name = '13R0923'
dac1 ACTIVE dacNONE ACTIVE
Disk DAC LUN Logical Drive
utm 31
hdisk2 dac1 0 1
请问我要怎样做才能让dac0 ACTIVE，目前HBA卡状态都是正常的，和存储的通信也是正常的，存储里唯一的这个LUN已经mapping给默认主机组了
收起