进入sms模式选择启动盘启动后修改bootlist

lspath  -t hdisk0lspath -t hdisk1 命令敲完，可以看到pathid了至于pathid有啥意义呢In AIX 6.1 TL 6 (6100-06-00) a new feature was added to allow a system administrator to specify which paths would be used to boot from in a multipath environment....

http://www-01.ibm.com/support/docview.wss?uid=isg3T1012688This may be necessary if there are more than 5 paths to a boot device, as the Open Firmware for pSeries systems only allows 5 devices (or paths) maximum in the boot list.

安装系统的时候需要按F5进入维护模式，以默认的引导列表启动。可是我用命令bootlist -m service -r 显示出来的引导列表是hdisk0 blv=hd5。显示结果是自定义引导列表吗？bootlist -m normal -r 显示的也是hdisk0 blv=hd5，请问安装完系统后是不是会改变默认的引导列表？...(more)