其实在vclient里面动态的调整微分区资源的话也是需要保证虚拟分区和HMC通信的。建议做一下步骤:1.确认在HMC里面已经识别到了虚拟分区的信息。通过ssh登陆到HMC里面。hscroot@cld-hmc:~> lspartition -dlpar Partition: Active:, OS:, DCaps:, ...
显示全部其实在vclient里面动态的调整微分区资源的话也是需要保证虚拟分区和HMC通信的。建议做一下步骤:
1.确认在HMC里面已经识别到了虚拟分区的信息。通过ssh登陆到HMC里面。
hscroot@cld-hmc:~> lspartition -dlpar
<#0> Partition:<1*8202-E4B*xxxxxx, cld-vio4.xxxx.com, 192.168.16.217>
Active:<1>, OS:
, DCaps:<0x4f9f>, CmdCaps:<0x1b, 0x1b>, PinnedMem:<698>
<中间分区省略>
<#79> Partition:<6*8204-E8A*xxxxxx, , 192.168.16.47>
Active:<0>, OS:<, , >, DCaps:<0x0>, CmdCaps:<0x0, 0x0>, PinnedMem:<726>
如果你的分区出现 Active:<0>的话表明HMC和微分区的RMC通信是连接不通的,这时候需要重新将rsct服务重启。
2.查看rsct服务。
lssrc -a | grep rsct
ctcas rsct inoperative
ctrmc rsct inoperative
IBM.ERRM rsct_rm inoperative
IBM.HostRM rsct_rm inoperative
IBM.ServiceRM rsct_rm inoperative
IBM.CSMAgentRM rsct_rm inoperative
IBM.DRM rsct_rm inoperative
IBM.AuditRM rsct_rm inoperative
IBM.LPRM rsct_rm inoperative
3.重启rsct服务。
# /usr/sbin/rsct/install/bin/recfgct
# /usr/sbin/rsct/bin/rmcctrl -z
# /usr/sbin/rsct/bin/rmcctrl -A
# /usr/sbin/rsct/bin/rmcctrl -p
4.重启HMC。重启后问题应该能解决。
当然前提你vios和HMC能够通信。收起