This is an error both connect the tape library and the tape drive.the drive status shound include drive status,port status and other status. pls first replace tape drive.
檢查一下故障盤的id是不是還在group中,如果還存在需要先ungroup,然後remove,再更換新盤,把新盤add group
nas硬盤故障時,原本配置為spare的盤會接手故障的硬盤成為陣列中的硬盤,新換上去的硬盤會成為spare。只需要檢查換上去的盤是不是有自動加入原本的pool中就可以一、開啟oncommand 來確認硬盤的狀態,應該是 spare 並有帶po
Unreadable Sectors Detected action plan一、collection All support data二、open unreadablesrctors.txt file三、check Physical drive and logical drive error四、if have physical drvie worng , replace phy
你要要先對磁帶做「盤點」的操作
他的思意是你的擴展櫃丟失了備援的路徑檢檢一下擴展櫃和ds4300之間的接線是不是有沒接好or 接錯的
原本是什麻故障 如果是硬盤故障,在有配置hotspare下,更換硬盤後需要等重建完hotspare in use的報警才會消失
确保 MDisk 逻辑单元状态可通过验证。只读或发生故障的 MDisk 无法通过验证。
以前的軟件許可,如果需要找回,需要有當初購買的許可証明,這些東西不管機器是不是在保,都是一樣的
兩個驅動器的微碼要一致,使用上才不會有問題如果原本驅動器的微碼使用上沒問題就把新的驅動器的微碼降版到跟舊的一樣的
关于TWT使用指南社区专家合作厂商入驻社区企业招聘投诉建议版权与免责声明联系我们 © 2024 talkwithtrend — talk with trend,talk with technologist京ICP备09031017号-30