系统集成存储设计规划
18同行回答
724
Fewer Ethernet ports active.
Explanation
An Ethernet port that was previously operational is no longer operational. The physical link is down.
Data:
Three numeric values are listed:
The ID of the first unexpected inactive port. This is a decimal number.
The ports that are expected to be active. This is a hexadecimal number. Each bit position represents a port, with the least significant bit representing port 1. The bit is 1 if the port is expected to be active.
The ports that are actually active. This is a hexadecimal number. Each bit position represents a port, with the least significant bit representing port 1. The bit is 1 if the port is active.
User response
If possible, use the management GUI to run the recommended actions for the associated service error code.
Possibilities:
If the port has been intentionally disconnected, use the management GUI recommended action for the service error code and acknowledge the intended change.
Make sure the Ethernet cable is connected at both ends and is undamaged. If necessary, replace the cable.
Make sure the switch port or other device the cable is connected to is powered and enabled in a compatible mode. Rectify any issue. The device service interface might indicate the issue.
If this is a 10 Gb/s port, use the remove and replace procedures to replace the SFP transceiver in the Storwize® V7000 and the SFP transceiver in the connected switch or device.
Replace the node canister using the remove and replace procedures.
Possible Cause—FRUs or other cause:
Ethernet cable
Ethernet SFP transceiver
Node canister收起
Fewer Ethernet ports active.
Explanation
An Ethernet port that was previously operational is no longer operational. The physical link is down.
Data:
Three numeric values are listed:
The ID of the first unexpected inactive port. This is a decimal number.
The ports that are expected to be active. This is a hexadecimal number. Each bit position represents a port, with the least significant bit representing port 1. The bit is 1 if the port is expected to be active.
The ports that are actually active. This is a hexadecimal number. Each bit position represents a port, with the least significant bit representing port 1. The bit is 1 if the port is active.
User response
If possible, use the management GUI to run the recommended actions for the associated service error code.
Possibilities:
If the port has been intentionally disconnected, use the management GUI recommended action for the service error code and acknowledge the intended change.
Make sure the Ethernet cable is connected at both ends and is undamaged. If necessary, replace the cable.
Make sure the switch port or other device the cable is connected to is powered and enabled in a compatible mode. Rectify any issue. The device service interface might indicate the issue.
If this is a 10 Gb/s port, use the remove and replace procedures to replace the SFP transceiver in the Storwize® V7000 and the SFP transceiver in the connected switch or device.
Replace the node canister using the remove and replace procedures.
Possible Cause—FRUs or other cause:
Ethernet cable
Ethernet SFP transceiver
Node canister收起
现在问题解决了，这个错误代码是因为只连接了一个控制器的网口，把2个控制器的网口接入到局域网中就行了。还有就是硬盘已降级的问题和这个错误代码没有什么关系。硬盘已降级的解决办法是：把原先的系统数据去除，然后再重新建立一个新系统。收起
浏览9762
硬盘怎么会降级的？问题解决了，原因在哪？以后维护的时候需注意了收起
浏览9103
学习了，结贴也值得学习收起
浏览9429