Value: 110000AC / Location code : U789D.001.DQD8Z47 在线等待高手回答是什么硬件告警,是否有更换这个配件的操作流程。非常感谢!
多半是电源问题,如果570连接有hmc 走repair流程就可以了,如果没连接,直接换也可以,但最好申请停机时间,设备比较老了,弄不好会宕机!
收起https://www.ibm.com/support/knowledgecenter/9119-FHB/p7eail/110000AC.htm
110000AC
Explanation
Detected AC loss 检测到的电源丢失
Response
简单的说:检查一下看看2-4个电源是否都正常,比如是否有异常亮灯,或者不亮。如果正常,之后不再报出,那就不必动作。如果不正常,就走硬件维修换掉。理论上可以在线更换,但的确也出现过更换过程中宕机的案例。
If system powers on normally or stays powered on after AC power failure, no replacement of parts may be needed. Follow the instructions for the items listed in the FRU List.
Problem determination
The system may have experienced an AC Power Loss external to the system such as utility or building power and the system may have recovered.
If there was a utility, building or room power loss that would have affected the system at the same time this SRC was reported then you can ignore and close this event. No service is required. Otherwise continue with the next step in this procedure.
Ensure the line cords are properly connected and seated on both ends. For help in locating the line cords of the power supply reporting this problem use the location code in the serviceable event or the symbolic FRU in the failing items list below.
If the system was just installed or moved, verify the AC input voltage is correct.
If the problem is not resolved then report this problem to your service provider.
Failing Item
ACMODUL
Parent topic:
(1100) Reference codes