IBM DS4000手动清除黄灯？

Global Fault LED on EXP810 or EXP 5000 (FW 7.xx) without any reason

Corrective Actions:

Steps:
Run the following shell command-
-> ssmShowEnclosures

Based on the output, use the following shell command to resolve the non-critical fault status-

ssmSubmitEnclosureCR <trayID>, <componentAddress>, 1,0,0,0,0,2

Example:

-> ssmShowEnclosures
[Storage Array]
[0x0335 - Enclosure - Tray ID: 4, ELI: 100000a0b8315588, Status: Non-Critical]

For the example case:
ssmSubmitEnclosureCR 4,0x0335,1,0,0,0,0,2

Perform the ssmSubmitEnclosureCR command on both controllers for the tray reporting a non-critical status.

DO NOT PERFORM THAT COMMAND AGAINST A CTRL ADDRESS ( 0x0101 ) this causes ctrl reboot!

Verification of the componentAddresses on our labsystems:
ssmShowEnclosures
DS4700

[0x0101 - Enclosure - Tray ID: 85, ELI: 0000000000000000, Status: Okay]          Controller 
[0x032c - Enclosure - Tray ID: 5, ELI: 100000a0b808ea6f, Status: Okay]       >   EXP 100
[0x032a - Enclosure - Tray ID: 30, ELI: 100000a0b81c21b4, Status: Okay]    >    EXP 710

DS5100
[Storage Array]

[0x0101 - Enclosure - Tray ID: 85, ELI: 0000000000000000, Status: Okay]     Controller 
[0x0335 - Enclosure - Tray ID: 9, ELI: 100000a0b84f79fd, Status: Okay]       > EXP 5000
[0x0335 - Enclosure - Tray ID: 2, ELI: 100000a0b81e8f4d, Status: Okay]      > EXP 810
[0x0335 - Enclosure - Tray ID: 8, ELI: 100000a0b84f7a09, Status: Okay]      > EXP 5000
[0x0335 - Enclosure - Tray ID: 11, ELI: 100000a0b8636f9a, Status: Okay]    > EXP 810