EMC vnx5100更换备用电源步骤?

用户备用电源损坏,需要更换电源,请教一下步骤如何进行。以下是错误信息::Severity : ErrorSystem : FCN00131600055Domain : LocalCreated : Jan 21, 2018 8:52:52 AMMessage : DPE (Bus 0 Enclosure 0) is faulted.Full Description : Disk Processor Enclosure (Bus 0 Enc...显示全部

用户备用电源损坏,需要更换电源,请教一下步骤如何进行。
以下是错误信息:
:
Severity : Error
System : FCN00131600055
Domain : Local
Created : Jan 21, 2018 8:52:52 AM
Message : DPE (Bus 0 Enclosure 0) is faulted.
Full Description : Disk Processor Enclosure (Bus 0 Enclosure 0) is faulted. Servers may have lost access to disk drives in this storage system.
Recommended Action : Contact your service provider.
Event Code : 0x7409
:
Severity : Error
System : FCN00131600055
Domain : Local
Created : Jan 21, 2018 8:52:52 AM
Message : SPS (Bus 0 Enclosure 0 SPS A) is faulted.
Full Description : Standby Power Supply (Bus 0 Enclosure 0 SPS A) is faulted.
Recommended Action : Verify that power cables and the communications (serial) cable are connected properly between the storage system and the SPS. If the SPS has completed charging its battery and the problem still persists, contact your service provider.
Event Code : 0x7404

收起
参与15

查看其它 2 个回答gwgp的回答

gwgpgwgp系统工程师山东瑞数信息技术有限公司

要买备用电源了,不知道如何下手,有没有大佬换过?机器过保了,也没法问400
我这个应该是坏的sps,我的vnx5100是双控制器,是否可以直接关闭坏的sps的电源,然后让备用的sp接管,直接更换sps?

系统集成 · 2018-01-30
浏览14212
  • 去官网找找replace的guide,参考上面的步骤更换。
    2018-01-30

回答者

gwgp
系统工程师山东瑞数信息技术有限公司
擅长领域: 主机云计算私有云

gwgp 最近回答过的问题

回答状态

  • 发布时间:2018-01-30
  • 关注会员:3 人
  • 回答浏览:14212
  • X社区推广