互联网服务修改iphpux mp

如何修改HPUX MP管理口IP地址?

修改HP RX8640 的MP的IP地址是不是只能使用串口线连接来修改,不能使用网线直接MP口来修改?显示全部

修改HP RX8640 的MP的IP地址是不是只能使用串口线连接来修改,不能使用网线直接MP口来修改?

收起
参与8

查看其它 2 个回答andy618的回答

andy618andy618  系统运维工程师 , GIMC

我已经处理好了,之前是因为串口驱动异常导致。

我用网线直连笔记本和MP口(MP口默认地址:192.168.0.1,不知道MP口的,可以直接重置MP口)。

我的操作如下:

MP login: Admin

MP password:(Admin)

(c)Copyright 2000-2008 Hewlett-Packard Co.,  All Rights Reserved.

                             Welcome to

                  rx8640\'s Management Processor

    MP MAIN MENU:

         CO: Consoles

        VFP: Virtual Front Panel

         CM: Command Menu

         CL: Console Logs

         SL: Show Logs

         FW: Firmware Update

         HE: Help

          X: Exit Connection

[mp00265510ee8a] MP> CM

                Enter HE to get a list of available commands

                      (Use ^B to return to main menu.)

[mp00265510ee8a] MP:CM> LS

Current configuration of MP customer LAN interface

  MAC address   : 00:26:55:10:ee:8a

  DHCP Status   : Enabled

  IP address    : 0.0.0.0         0x00000000

  Hostname      : mp00265510ee8a

  Subnet mask   : 0.0.0.0         0x00000000

  Gateway       : 0.0.0.0         0x00000000

  Status        : UP and RUNNING

  Link          : Connected 10Mb Half Duplex

Current configuration of Integrity Lights Out Advanced KVM card LAN interface

    No Integrity Lights Out Advanced KVM Cards were found

[mp00265510ee8a] MP:CM> lc

MP Configurable LAN devices:

     1 - MP Customer LAN

Enter LAN device to change, or [Q] to Quit: 1

Current configuration of MP customer LAN interface

  MAC address   : 00:26:55:10:ee:8a

  DHCP Status   : Enabled

  IP address    : 0.0.0.0         0x00000000

  Hostname      : mp00265510ee8a

  Subnet mask   : 0.0.0.0         0x00000000

  Gateway       : 0.0.0.0         0x00000000

  Status        : UP and RUNNING

  Link          : Connected 10Mb Half Duplex

    Do you want to modify the configuration for the MP LAN? (Y/[N])    y

    Current DHCP Status is: Enabled

    Do you want to modify it? (Y/[N])        y

    Toggle DHCP State? (Y/[N])       y

    New DHCP Status will be: Disabled

    Please confirm (Y/[N])     y

    -> DHCP Status will be updated.

    Static IP Address is: 192.168.1.1

    Do you want to modify it? (Y/[N])    y

    Enter new IP Address :   172.96.28.3

    New IP Address will be:   172.96.28.3

    Please confirm (Y/[N])      y

    -> IP Address will be updated.

    Current MP Network Name is: mp00265510ee8a

    Do you want to modify it? (Y/[N])      n

    Static Subnet Mask is: 255.255.255.0

    Do you want to modify it? (Y/[N])      n

    Static Gateway is: 192.168.1.1

    Do you want to modify it? (Y/[N]) (Default will be IP address.)     y

    Enter new Gateway : 172.96.28.254

    New Gateway will be: 172.96.28.254

    Please confirm (Y/[N]) y

    -> Gateway will be updated.

    Current Data Rate is: Auto Negotiate

    Do you want to modify it? (Y/[N])

遗失对主机的连接。

重新配置主机的地址,和MP同网段即可telnet  连上。

互联网服务 · 2016-12-16
浏览4091

回答者

andy618
系统运维工程师GIMC
擅长领域: 服务器Linux网络

andy618 最近回答过的问题

回答状态

  • 发布时间:2016-12-16
  • 关注会员:3 人
  • 回答浏览:4091
  • X社区推广