IBM DS 5100控制器Register Data Miscompare
一台5100控制器之前是4*1GData Chche Memory，后来升级到4*4G的Data Chche Memory，同时USB Falsh Memory 也升级了，更换后机器起不来，后面数字灯报：0 F，进串口sysWipe命令执行不了，其它命令可以，运行测试提示Error 0001 register data miscompare如图所示，这不是重点，重点是后来把四根1G的内存换回来，机器也起不来了，悲剧了，同样的问题，详细报告见附件，
附件：
DS5100控制器详细报告.rar (860.37 KB)
10同行回答
还有一台5300控制器也是这问题了，就是换内存之后出现的，伤不起，报的寄存器错误不知道说的具体是那个部位，有没有什么恢复出厂设置的方法，串口的sysWipe命令用不了，进M管理选项有个15项要密码不知道里面是什么，密码也不知道，...下面为串口查看到的错误信息：
---- Log Entry #0 FEB-14-2011 07:43:44 AM ----
WARNING: Reset by alternate controller
---- Log Entry #1 APR-26-2011 01:06:32 AM ----
WARNING: Reset by alternate controller
---- Log Entry #2 APR-26-2011 01:06:57 AM ----
WARNING: Reset by alternate controller
---- Log Entry #3 OCT-08-2011 05:57:35 PM ----
10/09/11-00:16:14 (symTask0): PANIC: Invalid memory block at 0x74fa878c
---- Log Entry #4 OCT-08-2011 05:57:43 PM ----
WARNING: Reset by alternate controller
---- Log Entry #5 OCT-08-2011 05:58:13 PM ----
WARNING: Reset by alternate controller
---- Log Entry #6 FEB-19-2012 06:51:16 PM ----
02/20/12-01:17:34 (symTask0): PANIC: Memory free failure at 0x74e558c0 (task=0xfc01358 \"symTask0\")
---- Log Entry #7 FEB-19-2012 06:51:51 PM ----
WARNING: Reset by alternate controller
---- Log Entry #8 MAR-19-2012 01:37:53 PM ----
Reboot due to ancient IO, scsiOp=175a600 poolId=0 opCode=2a
age=304923ms
03/19/12-20:06:15 (ddcTriggerHandlerTa): PANIC: ddcMgr: ddc collected.
---- Log Entry #9 MAR-19-2012 03:43:13 PM ----
WARNING: Reset by alternate controller
---- Log Entry #10 MAR-19-2012 03:51:55 PM ----
WARNING: Reset by alternate controller
---- Log Entry #11 MAR-25-2012 05:10:11 AM ----
WARNING: Reset by alternate controller
---- Log Entry #12 MAR-25-2012 05:14:23 AM ----
WARNING: Reset by alternate controller
---- Log Entry #13 AUG-06-2012 02:33:57 AM ----
WARNING: Reset by alternate controller
---- Log Entry #14 SEP-08-2015 12:58:40 AM ----
WARNING: Reset by alternate controller
---- Log Entry #15 OCT-10-2015 08:06:08 PM ----
Zip Byte Calibration Failed: Channel 0, Byte 7
REBOOTING.
---- Log Entry #16 OCT-10-2015 08:06:15 PM ----
Zip Byte Calibration Failed: Channel 0, Byte 7
REBOOTING.
---- Log Entry #17 OCT-10-2015 08:06:21 PM ----
Zip Byte Calibration Failed: Channel 0, Byte 7
TRIGGERING LOCKDOWN.
Zip Byte Calibration Failed: Channel 0, Byte 15
TRIGGERING LOCKDOWN.
---- Log Entry #18 OCT-10-2015 10:45:10 PM ----
No Zip Memory is present
---- Log Entry #19 OCT-10-2015 11:04:33 PM ----
Zip Memory population error inner slots
---- Log Entry #20 OCT-10-2015 11:08:01 PM ----
Zip Memory population error inner slots
---- Log Entry #21 OCT-13-2015 06:13:38 PM ----
10/13/15-18:13:38 (tShell0): ASSERT: Assertion failed: m_Instance != 0, file /u/symsm/ccm_wa/symbios/RAIDCore-2293.1.120/e10_777_7091-07.77.38.00/Application/RAIDLib/utlSingletonMgmt.h, line 52
收起
后来在串口里面对缓存进行了格式化操作下图第7项操作，还是不行，然后运行第二项，重新初始化所以的NVSRAM，在开机，过了警告灯报0 F的点，并且串口自检也没报上面回复内存错误，心里一阵惊喜，没想到更悲剧的事情发生了，控制器运行一段时间后报了蓝灯，这个似乎比较严重，后来重新刷了微码和...
在开机运行自检过程中，会报内存错误，但是内存放在正常的控制器中是好的，之前此台控制器也是正常，自从换了内存，就这样子了，自检报错信息如下：