1,安装了虚拟机后,ifconfig -a 发现lo0正常,但是发现不了网卡
2,经上网查找后发现需在虚拟机的 .VMX 格式的文件中 最下方加入
ethernet0.virtualDev = "e1000"
ethernet1.virtualDev = "e1000"
uuid.action = "keep"
请注意 uuid.action = "keep" 一定要加上,否则虚拟机启动时会修改你的网卡设置
重新启动虚拟机就可以访问到网卡了
ifconfig -a 可以发现名称为e1000g0的网卡
添加新评论1 条评论
2012-08-04 17:29
ifconfig e1000g0 plumb
#2 启用dhcp
ifconfig e1000g0 dhcp